Home > Chimney Products > Chimney Caps > Gelco 13 in. x 13 in. Base California Mesh Stainless Steel Single-Flue Chimney Cap

Gelco 13 in. x 13 in. Base California Mesh Stainless Steel Single-Flue Chimney Cap

Ask a Fireplace Specialist:

Share This Item With Friends:

Pin It

The Gelco 13 in. x 13 in. Base California Mesh Stainless Steel Single-Flue Chimney Cap is the ideal chimney cap for homeowners in areas with special code requirements advocating smaller mesh sizes, particularly in areas of California. This stainless steel chimney cap is available in a range of sizes and comes with a lifetime warranty on manufacturer's defects and rust, regardless of what type of fuel is used.

The design of this model Gelco Chimney Cap grips the flue tile with pointed, slotted hex-head set-screws allowing you to tighten down as much as needed. The chimney caps' 18-ga., 8 inch high, one piece screen has 5/8 in. mesh.

There's no reason to let animal pests, moisture, or debris get into your chimney and cause expensive damage, especially when there's such an attractive option available.The Gelco 13 in. x 13 in. Base California Mesh Stainless Steel Single-Flue Chimney Cap features the traditionally fine workmanship of all Gelco Chimney Caps such as the special cross break that gives the 24-ga. chimney cap lid extra strength and durability, along with the classic, perfectly styled look to fit almost any home's design.

Features

Stainless Steel Chimney Cap
100% 304-Stainless steel construction with
California sized 5/8" mesh is 8" high
18-gauge base and mesh with 24-gauge lid
Able to fit square, round, rectangular, or oval flue tiles
Hidden weld nuts provide no-strip, secure mounting
Manufacturers lifetime warranty for all fuels
Base Size: 13" W x 13" L
Fits Outside Tile Dimensions: 11" x 11" to 13-1/2" x 13-1/2"

Manufacturer: Gelco
Part Number: 13307

How to Properly Measure Your Chimney for a Chimney Cap

Chimney Cap Buying Guide

Overall Rating for Gelco 13 in. x 13 in. Base California Mesh Stainless Steel Single-Flue Chimney Cap

(based on 2 reviews)

Stainless steel is very impressive

By David from East Bay, Ca on December 5, 2011

Stainless steel is very impressive, my previous galvanized one rusted out within five years.
The cost difference was only $16.43 as well.
This should last a long time and makes a statement on your roof, looks rich.
I also like the 5/8 tighter mesh screen, seems like it would be better at keeping stuff off your neighbors and it's probably better wind resistance for down draft, cost was less than 3/4, funny.
Six screws hold it tight not like the cheap ones at the hardware store that tilt and blow off. (like my neighbors)
Shipping was quick as well I thought it would take a week and it arrived in two days.

Pros:

Looks, Quality

I would recommend this item to a friend.

Review for

By Richard on March 24, 2011

Excellent product. Well made and easy to install. Great customer service as well.

Gelco 13 in. x 13 in. Base California Mesh Stainless Steel Single-Flue Chimney Cap

$68.07

Quantity:

Gelco Chimney Top Adhesive

(1)

Gelco Chimney Top Adhesive fits a standard caulk gun and assists fasteners in securing a chimney cap to a masonry flue. ...(See Complete Description)

Regular Price: $7.99 Sale Price: $6.23

Quantity:

Gelco Galvanized Steel Bolt-On Chimney Cap Legs
You can attach this set of 4 galvanized steel bolt-on legs to Gelco and HomeSaver Pro single-flue chimney caps. The 12-gauge galvanized legs extend down and out and hold the cap in place on top of the chimney. Installation may not be totally secure when subjected to extremely high winds. ...(See Complete Description)

Regular Price: $27.99 Sale Price: $22.22

Quantity:

Gelco Stainless Steel Flue Gripper Leg Set
This set of bolted on grippers is used to make installation of a single flue chimney cap easier. The grippers are made from 12-gauge stainless steel and taper down to points that engage the inside of the flue. The cap is held in place by the points and the spring tension ...(See Complete Description)

Regular Price: $28.99 Sale Price: $23.22

Quantity:

Copperfield Stainless Steel Cap Mounting Brackets
All brands of single-flue chimney caps can be attached to the crown of a chimney using this set of 12 cap mounting brackets. The stainless steel, 18-gauge brackets bolt to the base of the chimney cap using the cap mounting screws. They are prepunched for tapcon masonry fasteners, you just attach ...(See Complete Description)

Regular Price: $40.99 Sale Price: $32.69