Part Number: 6DLR-MTSC
eFireplaceStore Item Number: CPF-69270
*Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
Having the right tools and equipment makes all the difference when installing chimney liner. If you're installing a DuraLiner chimney liner in a masonry fireplace, you may need this masonry thimble with slip connector for proper installation. This masonry thimble penetrates the masonry chimney to connect the DuraLiner to a single-wall stovepipe, and is available in 6 or 8 inches in diameter. To install this masonry thimble, the hole in the masonry needs to be 1/2 inch larger than the diameter of the thimble sleeve. Once it is in place, seal the gap between the sleeve and masonry with a high-temperature sealant. When you are finished with your chimney lining project, you'll be glad you chose this masonry thimble with slip connector from DuraVent DuraLiner.Chimney Pipe Buying Guide
Chimney Pipe Quote Form