DuraTech All-Fuel Aluminum Steep Roof Flashing - For Chimney Pipes with a 7-Inch Inner Diameter

When terminating a DuraTech All-Fuel Chimney through a steeply sloped roof use this Aluminum Steep Roof Flashing to prevent moisture and weather damage. Suitable for roofs with pitches between 7/12 and 12/12.

*Please Note: A separately purchased Storm Collar is required for installation.

DuraTech chimney pipe is designed for appliances that are tested and listed for use with a 2100 degrees Fahrenheit HT chimney system, such as wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas. Tested to UL test procedures 103 HT and listed under UL re-examination service number MH 7399.

Applications: 5"-8" DuraTech chimney pipe is a double-wall, all fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas, and zero-clearance fireplaces that are factory-built.

Materials and Construction: 5"-8" diameter DuraTech chimney pipe features inner wall of .020" 430 stainless steel. Outer wall options of .016" 430 stainless steel or .021" galvalume steel. A Thermal Tech (ceramic refractory) blanket insulation is encased between walls. Stainless steel end rings seal the pipe.

Listings: c-UL-us Listed to UL 103 and ULC S604 (MH7399) (Stainless steel outer wall required for installation in Canada.)

Simpson Duravent Item Number: 9550

Features

• Protects chimney pipes vented through roof*
• Durable aluminum construction
• For use with 7" DuraTech chimney pipes
• Suitable for roofs with pitches between 7/12 and 12/12
• 8" height
• Limited lifetime warranty
• *Separately purchased storm collar required