Below is a list of chimney components that are compatible with this item. If you are comfortable picking the components that you need for venting this item, please choose from the items below. If you need any help at all, please use our FREE advice from our certified fireplace specialists.
Manufacturer:Monessen Part Number: 400DVBPSC7SB eFireplaceStore Item Number: CUI-BDV400PSC7
BDV400 36 Inch Convertible Direct Vent Fireplace
Ember bed burner with fiber ceramic logs
Thermal efficiency up to 80%
Variable Hi/Lo flame control
Features glowing ceramic fiber logs with ember bed and realistic high flame
Easy access door latches
Uses 4" x 6-5/8" direct vent pipe
Removable unitized louver system for top and bottom
Illustrated consumer friendly deluxe control panel with easy lift off capabilities
Field convertible vent technology to vent horizontally or vertically
Natural gas and propane gas field convertible
Available in Natural Gas and Propane Gas
CSA Certified Design
17,000 - 24,000 BTUs
Viewing Area: 591 sq. inch
Approximately: 37-1/16" W x 40-1/2" H x 16" D
* Please see the accessories tab for available remote control options and their features.
*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
* Please Note: Please refer to the product features section for detailed information on remote control options.
This propane fireplace uses ceramic fiber logs and an ember bed for a realistic look with an 80-percent thermal efficiency rating, and the flames can be set to high or low. Door latches on either side allow easy access to the fire, and a unitized louver system can be removed for top and bottom set-up. The deluxe control panel features easy liftoff, and the field convertible vent technology provides ventilation either horizontally or vertically, using a 4-inch x 6 5/8-inch direct vent pipe. The 36-inch firebox gives a great fire-viewing area.
This has and adjustable "Hi-Lo" flame. Can you describe the appearance of the flame on the lo setting?
By eFireplaceStore on September 4, 2014
Because the flame turn down is not a full 50% on this model, there is not as much of a change in appearance. Flame height does decrease by a couple of inches, but still reaches approximately 1 inch above the log set. Ember presentation does not change between the low and high settings.