This fireplace hood is designed to be installed on Vantage Hearth direct vent gas fireplaces and has a 2" brow. The hood deflects heated air in a downward direction away from the surround and mantel to prevent damage to heat-sensitive materials. The hood has a length of 42" and comes with a black finish. This hood is not compatible with the VCD Value Advantage or multi-view models by Vantage Hearth. Other lengths are also available.
42" black fireplace hood
For use with Vantage Hearth's direct vent gas fireplaces*
*Not compatible with VCD Value Advantage or multi-view models
Manufacturer: Vantage Hearth Part Number: HD42 eFireplaceStore Item Number: CUI-HD42
My 42 inch fire place is a Majestic. On the remote control it shows Vermont castings. Do you think this hood will fit my fire place?
By Collin C. - NFI Master Hearth Professional on October 29, 2013
This hood is made for certain Vantage Hearth fireplaces. Because of the difference in brands, the products will likely not fit. However, if you are able to provide the exact model number of your Majestic fireplace, I will be happy to research the correct hood for your needs.
By Bill from Knoxville, TN on January 5, 2013
Can you please provide installation instructions? I have a stone fireplace.
By Collin C. - NFI Master Hearth Professional on January 6, 2013
This hood is actually designed to install onto certain models of Vantage Hearth fireplaces and will likely not work with other models. Is your stone fireplace enclosing a metal firebox or is it simply an open faced fireplace? If it is the latter of the two, what is the width of the fireplace opening?
By Linda from Birmingham, AL on December 18, 2012
I have a 42" wood-burning Heatilator fireplace, which is double-sided, and I am looking for a hood that is compatible. The other fireplace I have has a hood already attached which is approximately 2' wide and I like this and would like something similar. I am afraid the 4" models could pose a problem when I am cleaning ash from my wood-burning fireplace. Also, I have holes already pre-drilled for a hood on the wood-burning fireplace black metal surround.
By Collin C. - NFI Master Hearth Professional on December 19, 2012
We do offer universal hoods with a shallow 2-inch projection, which can be ordered in a surface mount style that attaches to the fireplace facing. It is unlikely that the current holes would be used, as they are intended for a factory fit type of hood.