I have an INSTA-FLAME fireplace model# DVS2RP-1 and we just changed over to natural gas from propane. However, INSTA-FLAME (CFM INC) is no longer around. What are my options of getting my fireplace to work with natural gas?
on November 9, 2012
CFM is no longer in business - their holdings were taken over by the Majestic corporation. Unfortunately, per Majestic there is no longer a conversion kit available for your Insta-Flame fireplace. Fuel conversion can simply not be done. I apologize for the bad news.
By Dave from Phoenix on December 5, 2013
Can I convert my Majestic NVBR36RN natural gas fireplace to propane?
By Collin C. - NFI Master Hearth Professional on December 5, 2013
These units are convertible, but the correct kit will depend on the gas valve that the unit has installed. This model used either a SIT 820 or a Honeywell gas valve. The brand name should be on the valve itself. Please advise at your convenience.
By Fred from Pittsgrove, NJ on July 2, 2013
We want to convert our fireplace from propane to natural gas. Where can I get the parts I need to convert a Master Flame Inc Aspen Industries Inc model # El-24-LP RADCO listing # 1280 complies with LA-RGA #2-72 serial #2393?
By Collin C. - NFI Master Hearth Professional on July 2, 2013
Unfortunately, we are not a dealer for the master flame series of logs. As such, we do not carry the appropriate conversion kit. I recommend visiting the manufacturer website to locate a dealer that may offer the conversion kit. The manufacturer website can be accessed here.
By Manny from Seattle, WA on May 25, 2014
I have an Majestic MR42 model - is there any way to add a blower to this Fireplace?
By eFireplaceStore on May 27, 2014
Unfortunately, the MR42 was unable to use a circulating fan. The MRC42 had provisions for such an accessory, but the MR42 was a smooth faced model that did not have the ducting necessary.
By Mary from Buffalo, NY on March 1, 2013
I have a DESA Vent Free propane fireplace, model number CF26PR and I am putting in natural gas in my home. Can this be converted?
By Kevin E. - Fireplace Specialist on March 1, 2013
Per the manufacturer's literature for this appliance, it is an unvented fireplace. Unfortunately, unvented or vent free appliances cannot be converted from one gas type to another. There is no conversion kit available to modify this unit.
By Barbara from Henderson, KY on November 19, 2013
I own an Appalachian Natural gas fireplace and want to convert it to an LP gas Model# UV-36FPN. Do you sell what I would need?
By Tyler M. - NFI Certified Specialist on November 19, 2013
It appears that you have an unvented log set. If this is the case, there is no conversion kit, as vent-free gas appliances cannot be field-converted. We apologize for this inconvenience.
By Christine from Maple Shade, NJ on July 29, 2013
We have a vent free propane gas burner and log insert in our family room fireplace and we want to convert to natural gas. Do you have a conversion kit?
By Tyler M. - NFI Certified Specialist on July 30, 2013
Unfortunately, no. Vent-free gas appliances cannot be field-converted for fuel type. We apologize for this inconvenience.
By Charles from Chattanooga, TN on December 30, 2013
I have a Desa model VSGF28PTC ventless on propane gas. Do you know of away to convert it to natural gas?
By Tyler M. - NFI Certified Specialist on December 30, 2013
Unfortunately, vent-free gas appliances cannot be field-converted for fuel type. We apologize for this inconvenience.
By Tammy from Arizona on January 29, 2013
We have a gas FP but the gas line coming from the meter to the house has a leak. We want to convert it to propane use but don't know what we need to do so. The FP has a chimney stack on the roof for venting. We can't find anyone in our area that has knowledge of gas FP installations. We just want to be able to use propane, as getting the gas line repaired is in excess of 900.
By Kevin E. - Fireplace Specialist on January 29, 2013
Retrofitting this fireplace for LP use may indeed be a suitable solution. The log set will need to be converted to accept LP. As the LP tank cannot be stored indoors, a gas line will need to be run from your new LP tank to the fireplace. A certified professional should be hired to complete this job. Please visit the National Fireplace Institute site to locate a certified hearth professional in your area. Once NFI's site, click Public to search for a professional using your ZIP code.
By Eric from Archdale, NC on February 23, 2015
I am looking for a propane to natural gas conversion kit for a Monessen HVFL24P fireplace. Is this available?
By Tyler M. on February 23, 2015
Unfortunately, there is no fuel-type conversion kit for the HVFL24P, as it is a vent-free gas appliance. These types of burners cannot be converted; we apologize for this inconvenience.
By Bob from Camdenton, MO on July 11, 2013
I have a FireTech FR3325-3PR propane vent free fireplace . We are changing over to natural gas in the near future. What parts do I need to convert the unit?
By Tyler M. - NFI Certified Specialist on July 11, 2013
Unfortunately, vent-free fireplaces cannot be field-converted for fuel type. As such, there will be no conversion kit available for your model. We apologize for this inconvenience.
By Kris from NYC, NY on October 5, 2014
I need a conversion kit for a Majestic UVC 36RN. What would you suggest?
By eFireplaceStore on October 6, 2014
My apologizes, but conversion kits are not available for this model. Being a vent free heater, the manufacturer produced it to be burned only with natural gas. Conversion of a vent free appliance can be potentially dangerous and as such, most manufacturers did not produce field conversion kits for them.
By Fonda from Catawba SC on March 5, 2014
I have a DFS36 Can I convert it from Propane Gas to Natural Gas?
By Tyler M. - NFI Certified Specialist on March 5, 2014
The Monessen DFS36 model is a vent-free gas fireplace. Unfortunately, vent-free gas appliances cannot be field-converted for fuel type. We apologize for this inconvenience.
By Justin from Lewisville, NC on December 13, 2014
I have the VFSR-18-4 model burner that is natural gas and I need to convert it to propane. Is a kit available for this?
By eFireplaceStore on December 15, 2014
Unfortunately, no. The VFSR series is a vent free burner assembly. Because of the strict guidelines in regards to the build and certifications for vent free burners, this manufacturer does not offer a conversion kit for it. I sincerely apologize for the inconvenience.
By Lawrence from Spring, Texas 77388 on January 4, 2013
I have a wood burning fireplace and would like to convert to a propane gas fireplace. Any ideas?
By Tyler M. - Fireplace Specialist on January 4, 2013
You have a few options to consider, depending on if your fireplace is a brick/masonry unit or a manufactured (metal) model. If you prefer, please reply with your full fireplace dimensions (front width, rear width, opening height, depth, etc.), as well has how you want to control the unit (on/off remote, variable flame remote, wall switch or manual), and we will be happy to offer some recommendations. You may also use the following articles on our website for more information about your choices:
I have a Napoleon NZ26 wood burning fireplace (purchased 2004) and would like to convert to a propane gas fireplace. Any ideas?
By Chris C. on July 14, 2014
Unfortunately, the manufacturer strongly recommends against the installation of a vented or ventless gas log set into the NZ-26. Additionally, there are no knock outs to run a gas line into the firebox itself.
By Patricia from Chicago, IL on December 23, 2013
We already have a gas log lighter in our fireplace. What do we need to convert to gas logs?
By Collin C. - NFI Master Hearth Professional on December 23, 2013
Ideally, the log lighter would be removed and a new burner assembly and log set put in its place. We sell complete systems, based on the size of your fireplace. If you would like to provide the front width, rear width, depth, and height of your fireplace, I will be happy to suggest a few sets to fit your needs.
By Pat from New York on December 23, 2013
Can I get an LP conversion Kit for a Charmglow vent free gas fireplace model# PF06-YJLF-F? If so, where can I find it?
By Collin C. - NFI Master Hearth Professional on December 23, 2013
Unfortunately, conversion kits for vent free appliances are not manufactured. Because of the dangers that can result from an appliance being improperly converted, manufacturers simply do not make the parts.
By Mario from Alfred Ontario on April 24, 2014
Is there a propane to natural gas conversion kit for a majestic D232?
By Collin C. - NFI Master Hearth Professional on April 25, 2014
Per the manufacturer, conversion components for this unit are not available. I apologize that I cannot obtain the needed parts.
By Carl from Cape Coral, FL on August 15, 2014
I have a Majestic model DVRT36RN. I would like a Natural Gas conversion kit to Propane. Do you have this?
By eFireplaceStore on August 15, 2014
This model used one of two valves for operation. The gas valve should have the name "Honeywell" or "SIT" on a sticker located on the valve. Please advise which version you have at your convenience.
By Terri from Roanoke, VA on March 7, 2013
I have a Monessen DLX24 propane log set that I want to convert to gas, what do I need to buy? I also have a vantage hearth VD1824PR that I want to convert to gas.
By Collin C. - NFI Master Hearth Professional on March 8, 2013
Because of the potential dangers that can occur from incorrect conversion, most manufacturers do not allow field conversion or produce conversion kits for vent free appliances.
I have checked the manufacturer information for both of these vent free log sets and neither of them allow for conversion. The units would need to be replaced with a natural gas version.
By Julie from Arlington, TX on April 8, 2014
I have a gas fireplace in which I burn wood. The pipe along the bottom under the rack that feeds gas across the bottom is bent. Can I just unscrew it (with the gas turned off by the key) and straighten it out?
By Collin C. - NFI Master Hearth Professional on April 8, 2014
Most gas log lighters are made of cast iron, which is difficult to straighten if it becomes bent. You can attempt to straighten it, but it will need to be heated at the bend and very carefully straightened to avoid cracking the material.
By Craig from Pulaski, NY on February 27, 2015
Is there a natural gas to LP conversion kit for the Majestic EYF24-F gas log set?
By eFireplaceStore on February 27, 2015
Unfortunately, no. Because of the dangers of an improperly converted vent free appliance, the manufacturer does not produce conversion kits for them. The burner itself must be replaced.
By Kate from Essex, Ontario on December 9, 2013
Is it possible to change a Continental HD35 top vent fireplace to a side or rear vent using a kit?
By Collin C. - NFI Master Hearth Professional on December 10, 2013
Unfortunately, no. This fireplace is engineered only as a top venting model. There simply is not a way to convert the model to a rear venting configuration.
By Emily from Orono, ME on October 24, 2014
I have an Empire VFYM-24 fireplace. Is this a vented unit that can be converted to natural gas from propane fireplace?
By eFireplaceStore on October 24, 2014
This unit is designed as both a vent free or vented room heater. However, because its primary design is as a vent free heater, the manufacturer did not produce conversion kits to work with it. I apologize that the parts are not available.
By Kevin from NJ on December 5, 2014
I have a Pyromaster vent free gas room fireplace model UVHB20. Is it possible to convert it to use propane?
By eFireplaceStore on December 5, 2014
Unfortunately, manufacturers of vent free appliances do not manufacture fuel conversion kits for them. This is due to the potential liability involved if one is incorrectly converted. I apologize for the inconvenience.
By Andrew from Burlington, Wisconsin on August 5, 2014
I have a Majestic Warm Magic WM36-1 wood burning fireplace insert. I would like to convert this to a natural gas fireplace. What parts do I need?
By Chris C. on August 5, 2014
A natural gas line would first need to be run through one of the gas line knockouts on the left or right hand side of the fireplace. Once the gas line is installed, an 18" log set would be best suited based on the sizing of the fireplace hearth. The sets below are more of a middle of the line type pilot assembly with a standing pilot to ease the on/off capability of the log set itself.
There are many more sets available, but these above are the more popular options we offer.
By Customer from Florida on November 24, 2012
I have a direct vent natural gas fireplace, Martin Industries DV6500. Is there a conversion kit to change to LP gas?
By Collin C. - NFI Master Hearth Professional on November 26, 2012
Unfortunately, conversion kits for this unit are no longer available. Martin was purchased by Majestic and their product line was discontinued.
By Chris from Griswold, CT on December 31, 2012
I am looking for a natural gas-to-propane conversion kit for my Monessen gas fireplace. The model number is DFS42NMA. Is there a kit for my stove? The installer from the gas company said the stove is set up for natural gas and I need a conversion kit.
By Tyler M. - Fireplace Specialist on December 31, 2012
Your model appears to be in the line of DFS vent-free units manufactured by Monessen. If this is the case, unfortunately there is no conversion kit available as vent-free units cannot be field-converted. We apologize for this inconvenience.
By Jim from Firth, Idaho on December 9, 2013
We have propane heating stoves that we wish to convert from electric start to manual start (when the power goes off). Is there such a thing?
By Collin C. - NFI Master Hearth Professional on December 10, 2013
It is not common for manufacturers to offer modular pilot kits that would allow you to switch from electronic ignition to manual ignition, but there are some products on the market. I would need to know the manufacturer name and model number of the stoves to check further.
By Lovella from Browns Summit, NC on October 14, 2014
I am trying to find a conversion kit for a 18" natural gas logs set from the Charleston forge model ne'er HDVDR18W. I want to make them propane. Do you carry these?
By eFireplaceStore on October 14, 2014
Unfortunately, a conversion kit was not manufactured for this log set, as it is an unvented product. Due to the potential dangers of an incorrectly converted vent free set, manufacturers only test and list them for use with the fuel they were originally orificed for.
By Krista from Ohio on November 23, 2013
How can I determine the manufacturer of my ventfree gas fireplace?
By Collin C. - NFI Master Hearth Professional on November 24, 2013
Vent free fireplaces are shipped from the manufacturer with production and certification plates, which are usually chained or cabled to the gas valve in the bottom of the unit. On the production plate will be the manufacturer name and model number. Some manufacturers will also have a sticker attached to the side of the unit as well, either inside the firebox or in the bottom area near the gas valve.
By Steven from Alabama on August 19, 2014
I have a Vermont castings LP log set and I just had natural gas run to my house. Can I get a conversion kit?
By eFireplaceStore on August 20, 2014
Unfortunately, a conversion kit is not offered for this log assembly. Because the set is unvented, it is certified for use only with the original fuel it was built for. Because an improperly converted vent free appliance can be dangerous, most manufacturers do not offer conversion kits for them. I apologize for the inconvenience.
By gregg baranski from New Jersey on December 10, 2012
Can I convert the Napoleon GVF36P to natural gas? Which kit would I use?
By Tyler M. - Fireplace Specialist on December 11, 2012
Unfortunately, your vent-free fireplace cannot be field-converted to natural gas. The entire unit would need to be replaced, as vent-free appliances are designed only for use with the fuel type they are shipped ready to use.
By Kerwin from Denver, PA on June 4, 2015
We have an ESA International CGCF26PR firebox. My wife got it for free from someone who has never used it before and took it out of their fireplace. It looks almost new and we are having natural gas installed throughout our home. Are there any conversion kits available for this model of firebox? I did a search on google for the manufacture but couldn't find anything.
By Will M. on June 4, 2015
Unfortunately, vent free appliances are not convertible.
By Ryan from Colfax, WI on October 9, 2014
I have a DVRT36 RP fireplace manufactured by Majestic. It is currently running on propane and we will be converting our home to a natural gas service. Which conversion kit do I need? It seems that most kits are to convert from natural gas to propane but I need to convert the other way.
By eFireplaceStore on October 9, 2014
Unfortunately, the manufacturer no longer carries conversion kits for this particular model. This unit used a certain Honeywell or SIT valve system, which is no longer in production. The conversion kits where out of stock by early 2013. I apologize that I can no longer obtain the parts.
By Jason on November 9, 2012
I have a TEMCO fireplace made by CFM Corporation, model 36TDVN direct vent top. It is a natural gas fireplace, but I have propane. Do you have a converter that I can use to take it from natural gas to propane?
on November 9, 2012
It is a bit difficult to find replacement components for the Temco line. This is due to their going out of production several years ago. However, their parent company, CFM, was absorbed by Majestic. As such, there is a chance that there is still a conversion kit available at Majestic for your Temco fireplace. I will contact our supplier and see what may still be available.
I will be in touch with what they report. Please let me know if you have any questions in the meantime.
By David on November 9, 2012
Do you sell “fireplace adaptors”? I’m try to follow the installation instructions for my stove.
on November 9, 2012
While we do not have "fireplace adaptors" per se, we do have tees designed for use with our liner kits. For example, the below tee features a removed 10" take off:
Ultra Pro Tee
This tee requires a separately purchased cap: