Part Number: DVF-36PH-D
eFireplaceStore Item Number: FSD-DVF-36PH-D
*Venting Requirements: This unit requires venting pipe with an inner diameter of 5 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
* Please Note: The Devonshire is pictured with an optional brick perimeter trim kit. This brick perimeter trim kit is available for purchase on this item page, but is NOT INCLUDED with purchase of this item and must be purchased separately if desired.
This direct fireplace has a beautiful clean face design. The inside of the fireplace features a refractory brick liner that is individually cast and hand finished for a superbly realistic masonry look. The burner produces 28,000 - 47,000 BTU and uses a fully electronic ignition and operating system with an included remote control. The fire is lovely to look at because of the ceramic ember bed as well as a unitized log stack that creates a lively flame and a deep smoldering glow. The front also features a ceramic glass door for maximum heat radiation and mesh safety pull screens to guard against burns. The unit uses 5" x 8" FMI direct vent pipe. A 2-year warranty applies. The required framing dimensions are 41.5" W x 43.25" H x 22" D.Fireplace Maintenance Guide
The 5 Biggest Mistakes Made When Purchasing a Fireplace
5 Common Mistakes Contractors Make
Gas Fireplace and Stove Buying Guide
How to Choose the Right Venting for Your Fireplace
How to Install a Fireplace: The Ultimate DIY Guide