By Elan from WA on June 25, 2017
Do the screens open independent of the glass doors? In other words, can you have the screen open with the doors closed and vice versa?
By Will M. on June 26, 2017
Answer:The mesh pull screen will slide open through a screen rod with rings atop each mesh panel while the doors will slide open on a separate track, so the screen will absolutely operate independently of the doors.
By Pam from GA on April 22, 2016
Will this mount to the exterior of a prefab metal fireplace?
By Brennan W. on April 22, 2016
Answer:Unfortunately, this is only able to be mounted to a masonry fireplace opening.
By Elizabeth from Houston, TX on October 9, 2015
I have a brick wood burning fireplace that was built in the early 60's. I also have gas logs. Does this Gallery Vintage iron glass fireplace door assembly mount to the front surface of the fireplace rather than inside the opening?
By eFireplaceStore on October 12, 2015
Answer:This door assembly does indeed mount to the surface of the masonry surrounding the fireplace opening. Recessed mounts are available via special order, if that is the look you desire.
By Matt from Baltimore, MD on October 25, 2015
Can I have a fire with these Gallery Vintage iron glass fireplace door assembly closed? Are the doors made out of pyro-ceramic glass?
By eFireplaceStore on October 26, 2015
Answer:While the doors are not ceramic, these tempered glass doors can indeed be closed while the fireplace is burning. It is important to let them warm gradually by leaving them open for the first 10 to 15 minutes of the burn time. After that, they can be closed and the air gap between each pane will allow cooling and combustion air to be drawn in.
By Barbara from Houston, TX on July 2, 2014
Can this be used with a fabricated gas fireplace or is it only for masonry fireplaces?
By eFireplaceStore on July 3, 2014
Answer:This door assembly can be used with a fabricated fireplace, as long as the surrounding wall is flush with the rest of the unit. The unit must also not have any louvers or grills on the face that will be covered by the door assembly. Lastly, the mounting brackets will need to be modified to attach to the face of the unit.
By Jenny from Louisville, KY on January 9, 2017
The fireplace opening is 33 in wide (this is in between door sizes). Do I order doors a size up or down?
By Will M. on January 10, 2017
Answer:As both the 34" and 40" finished widths will work, you would simply need to consider whether you would like more of the 33" fireplace opening showing. By choosing the 40" width, the 3" sidebars will not project into the fireplace opening quite like they would with a 34" finished width.
By Fred from Glendale, CA on December 19, 2016
Gallery Vintage Iron Glass Fireplace Door Assembly _ Fireplace
Opening: 30Wx30H; Will this glass door fit in a tiled opening (Black finish)?
By Will M. on December 20, 2016
Answer:A chosen width of 34" and height of 32" would be correct for a 30" x 30" opening. Ceramic tile should really not be used for the inside of a masonry fireplace opening, but the doors should install without issue so long as the top lintel depth is no greater than 6".