By Meg from Grand Cane, Louisiana on January 11, 2013
Where can i find out the easiest way to REMOVE a double wall stove pipe from my ceiling and roof?
By Collin C. - NFI Master Hearth Professional on January 11, 2013
Answer:Removal of the pipe will depend on how many stories and the attic space the chimney is passing through.
By Gary from AZ on May 29, 2014
I can't seem to find accurate technical specs and detailed drawings and photos of your products on this page. Can you tell me more about this product?
By eFireplaceStore on May 30, 2014
Answer:I apologize for the lack of technical information about this product. While we strive to provide the best photos and information we can about our products, the manufacturers do not always make this information available to us.
This direct vent pipe section is a proprietary product that is designed for use with most FMI direct vent fireplaces that have a 5 inch I.D. and 8 inch O.D. flue collar. The inner wall is 26 gauge aluminum and the outer galvanized steel. Actual length is 12 inches, with an effective gain of 10 1/2 inches when installed. I will be happy to provide any other information needed.
By Ken from Tucson, Arizona on June 5, 2014
Answer:I had the same issue. Had to call into an eFireplaceStore rep. He was slightly helpful. I took a leap of faith and thankfully my design worked.