By Carl from NJ on October 30, 2015
Will this Heart Products Controls Seville decorative brick firebox panel fit a Bayfront 5660 pellet stove US Stove as a firebox liner?
By Tyler M. on October 30, 2015
Answer:No, this decorative panel is only meant for use inside a gas firebox or fireplace. It is not suitable for use in a pellet stove. We apologize for the inconvenience.
By Kim from Purvis, MS on February 3, 2016
Is this Hearth Products Controls firebox panel safe to use in a log burning fireplace?
By Brennan W. on February 3, 2016
Answer:This panel should only be used in a gas fireplace.
By Rolf Amundson from Wyoming on January 18, 2017
What type of tools are needed to cut this material? Are there any safety precautions needed while cutting or working with this material?
By Owen on January 18, 2017
Answer:You can use a Keyhole Saw, and I would wear a dust mask.
By Orlando from Arlington, TX on November 6, 2014
How big are these panels?
By Brennan W. on November 6, 2014
Answer:These panels are 22.5" x 19.5" x 1/2". They can easily be cut with any circular saw fitted with a masonry blade if you needed to trim them down for a perfect fit.
By Michelle from NY on May 12, 2015
Can these Hearth Products decorative brick firebox panels be used in a prefabricated wood burning stove?
By Brennan W. on May 12, 2015
Answer:These are only meant to be used in a prefabricated gas fireplace. As such, these should not be used in a wood burning application.
By Greg from Parlin, NJ on November 21, 2016
Are these panels available in different sizes?
By Greg from Parlin, NJ on November 21, 2016
Do you sell mantle surrounds?
By Frank from Nicholasville, KY 40356 on March 23, 2014
What size are the panels? How thick are the panels?
By Tyler M. - NFI Certified Specialist on March 24, 2014
Answer:This panel measures 22.5" wide by 19.5" high and they are 1/2" thick. They can be cut to the size you need.
By John from Arcadia, WI on October 19, 2013
Can this panel be used in a wood burning fireplace? If not, do you have any that will work?
By Tyler M. - NFI Certified Specialist on October 21, 2013
No, this panel is only suitable for use inside a gas fireplace. However, we do offer some universal refractory panels that will work for your woodburning fireplace. Please see the following links:
One 24"h x 28"w Panel
Two 24" h x 40"w Panels
These panels are about 3/4" thick and can be cut down to the size you need with a masonry blade or tile saw. They are suitable for use as side, rear and floor panels inside any manufactured woodburning fireplace.
By Tim from Purcellvile, VA on December 21, 2014
I am converting a wood burning insert to one that uses gas logs only. Is this product OK to line my firebox with? Also, is it satisfactory to use this on the firebox base under the gas logs?
By eFireplaceStore on December 22, 2014
Answer:This product can be used to replace the heavy refractory liners that come standard in a wood burning fireplace, as long as the unit will only be used for gas. A panel can be used on the floor, but care should be taken to place the log grate carefully to prevent crushing the panel. Should the unit be converted back to wood burning duty, the ceramic panels will need to be removed again. Please keep in mind that removing the refractory panels will void the listing of the fireplace.
By Tracy from Port Leyden, NY on August 16, 2014
Can this panel be used in a pellet stove?
By eFireplaceStore on August 18, 2014
Answer:Unfortunately, no. These ceramic panels are designed for use in a gas application only. Exposure to combustion byproducts in a wood burning or gas application will cause them to degrade rapidly.
By pam from california on June 3, 2012
Is that price per panel and would you use brick on the bottom or could you use the panels?
By Collin C. - NFI Master Hearth Professional on June 4, 2012
Answer:This is indeed a per panel price. This is designed to be used on the walls of the gas fireplace only. The ceramic construction is not strong enough to be used on the floor of the opening.
It would be necessary to use masonry brick, mortar, or metal for the base.
By Chrissi from Atlanta on February 27, 2013
How do you cut it down to size? Do you need a special tool?
By Collin C. - NFI Master Hearth Professional on February 27, 2013
Answer:These panels are best cut with a fine tooth band or jig saw. No special tools are required.
By Ronald from Barboursville, WV on January 2, 2017
Will this also work in pellet stoves?
By Chaz on January 2, 2017
Answer:Unfortunately, no. These ceramic panels are designed for use in a gas application only. Exposure to combustion by products in a wood burning or gas application will cause them to degrade rapidly.