Below is a list of chimney components that are compatible with this item. If you are comfortable picking the components that you need for venting this item, please choose from the items below. If you need any help at all, please use our FREE advice from our certified fireplace specialists.
Manufacturer:Kingsman Part Numbers: VFI25N, VFI25LP eFireplaceStore Item Number: KGM-VFI25N
SIT valve with Hi/Lo
Gas insert fireplace
Ceramic glass face
Product Dimensions: 24" W x 17 1/2" H x 16" D
Max/Min BTU Output: Natural Gas 25,000 / 17,000
Max/Min BTU Output: Propane Gas 25,000 / 17,040
Gas Inlet Size 3/8"(SIT)
Gas Supply Pressure:
Min/Max Natural Gas: 4.5 / 9
Min/Max Propane Gas: 11 / 12
*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
* Please Note: Customer must choose fuel type, a log set, a front grill kit, and a surround and trim kit.
Turn your traditional wood-burning fireplace into an efficient, cutting-edge gas fireplace with the Kingsman VFI25 Vented Fireplace Insert. Listed in the USA and Canada as a Vented Gas Fireplace, this gas insert includes a dual burner with glowing embers and fits into the area where your original wood-burning fireplace was before. The ceramic glass face erases the need for a screen, and the Kingsman VF125 has a SIT valve with Hi/Lo setting. The 4-inch flue keeps your insert ventilated, and a variable speed thermostat controlled blower are included along with a safety spill switch. The unit reaches 25,000 BTU and fits inside 24"W x 17-1/2"H x 16"D dimensions.
Why is the surround/trim required for the product?
By Tyler M. on July 19, 2017
The surround is required as the part needed to cover the rest of your firebox opening after this insert is installed inside the existing fireplace.
By Greg Simon from Seattle on December 28, 2016
I don't like the look of fireplace logs. Could I use this model with just the embers (no logs) or lava rock (instead of the supplied logs)?
By Will M. on December 29, 2016
Lava rock should never be placed atop the burner with any gas fireplace. While the embers should always be placed atop the burner as described in the installation manual, the logs should also be placed as instructed in the product literature for proper combustion and flame effect.
By Betty from Larned, KS on December 16, 2015
Can this Kingsman VFI25 vented fireplace insert be installed in an entertainment center?
By Brennan W. on December 16, 2015
This unit is only meant to be installed in an existing wood burning fireplace.
By Nick Driver from San Francisco, CA on November 16, 2016
I have an old Edwardian house in California with a small fireplace. The internal cavity is only 20 inches wide and 23 inches high and 11 inches deep. Will this insert fit? Is there another that will fit?
By John Van Wyk from Santa Barbara, CA on November 28, 2016
I have an old 1907, built-in fireplace. It measures (height) 30", (front width) 25", (back width) 25", and (depth) 14.5" Do you know of a vented gas fireplace insert that will fit this fireplace?