By Janice Haskett from Simcoe, Ontario on December 2, 2012
We have a HBDV300NV Monessean 33 inch direct vent fireplace. We would like a blower - who wouldn't? Is this the unit? Do you ship to Canada? USPS is fine, as is UPS.
By Collin C. - NFI Master Hearth Professional on December 3, 2012
Answer:This blower is indeed compatible for use with this fireplace. This is the manual blower that does not tie into the signature command control system and will operate by a thermostatic switch and speed control.
We can indeed ship this item to Canada, via UPS. A shipping quote will be provided to you upon adding the item to your online shopping cart.
By Steve from Durango, CO on March 30, 2017
I bought an FK24 to install in my Majestic 400dvbh fireplace. The blower backplate is a little over 15 inches long, the gap between 2 vertical slats in the back of my fireplace where the blower is to be mounted is only about 14.24" wide. Do I have the wrong blower?
By Owen on March 31, 2017
is the correct blower for the 400 DVB.
By Ted from Trenton NJ on November 19, 2011
I'm looking for a bower that would fit my fireplace. The box is old .What can i do?
By Kevin E. - Fireplace Specialist on November 21, 2011
Answer:All of the blowers we offer are all brand specific. This particular unit is compatible with several Majestic and Monessen appliances. Due their specificity, we do not list individual blower measurements. The best course of action is to determine the brand and model of your fireplace and find the appropriate blower for it.
By Karen Stephenson from NC on November 8, 2011
We have a Martin Direct Vent fireplace, 600DVS LP R/T and would like to purchase a blower kit for the fireplace. We already have a plug-in inside of the fireplace. What do we need? It calls for a BLOT. Do you have BLOT 160 cfm?
By Tyler M. - Fireplace Specialist on November 8, 2011
Answer:Yes, the this BLOT blower has a 160 cfm rating. Please note, that while it may work with your Martin unit, it is only listed here as compatible with the following:
CDV Direct Vent Gas Fireplaces
DVB Direct Vent Gas Fireplaces
DVBH Direct Vent Gas Fireplaces
32" VFS Vent Free Gas Fireplaces
32" Chesapeake CFX Vent Free Gas Fireplaces
By Steve Fischer from Westfield, IN on October 30, 2012
We recently moved into a condo with a small Majestic gas fireplace. Where do I find a model number so I can order the correct blower kit?
By Tyler M. - Fireplace Specialist on October 30, 2012
Answer:Depending on your unit, there are a few places the manufacturer information may be located. The first location would be a metal plate that is on the left or right side of the smoke shelf bracket, right at the top of the fireplace front opening. The next place would be just on the inside of the opening, behind the fireplace screens on the left or right side.
The last location would be in the void space underneath the fireplace floor. This can be accessed either through the front of the unit's louvers or through a removable floor panel underneath the bottom refractory.
By Rich from Duluth, MN on December 21, 2015
Will this Majestic BLOT variable thermostat forced air fireplace blower work with model a 33LDVT RN fireplace as I think the FK12 and the FK24 are obsolete?
By eFireplaceStore on December 22, 2015
Unfortunately, your model number was one that did not allow use of the BLOT. The FK24 is indeed discontinued, but the FK12 is still available and can be located here
By Jim from Fairport, NY on January 18, 2014
I have a Monessen Direct Vent CDVT36 Gas Fireplace and wish to add a blower. I'd like to get a recommendation for a quality Blower Kit. I noticed this unit has a Variable Thermostat but there is another that seems very similar but w/out a variable thermostat I think. Will either work in my unit, and is the additional money worth it?
By Collin C. - NFI Master Hearth Professional on January 20, 2014
Answer:Both the BLOT and the FK12 are rated for use with your particular model of fireplace. The BLOT and the FK12 are both well made fans and will offer years of service. The convenience of the thermostatic operation on the BLOT is a nice feature, not only because of the hassle free operation, but because it always ensures that the blower cycles at the proper times. However, it boils down to personal preference between automatic and manual operation.
By chris schultz from Crestwood, IL on November 14, 2012
Can I just purchase the snap-t-stat and/or rheostat control separately? How do I do that?
By Tyler M. - Fireplace Specialist on November 14, 2012
Answer:Yes, but these parts must be special ordered from the manufacturer and will take 3-5 weeks to ship to you.
By Terri from Cornwall, New York on January 2, 2017
I need a replacement pilot assembly or thermopyle for my Majestic cast iron heater model RUV40.
By Brennan W. on January 3, 2017
Answer:I will be happy to look into this for you. If you could, please provide the serial number of your stove.