By Joyce from NJ on February 17, 2016
What is the depth of this Majestic vent-free firebox?
By Tyler M. on February 17, 2016
Answer:This firebox has a framing depth requirement of 20 3/4", and the inside of the firebox has a depth of 17".
By Noel from Birmingham, AL on January 16, 2015
I am looking for a metal prefabricated firebox for a vented, wood burning unit. I need something that is approximately 36" x 30". What would you suggest?
By eFireplaceStore on January 16, 2015
We carry a popular product line that has the exact 36 inch wide by 30 inch tall opening you are looking for. The item is the FMI Georgian 36 Inch Smooth Faced Woodburning Fireplace
. Unlike many other prefabricated boxes, this model lacks a smoke shelf, which allows the unit to give a true 30 inch tall opening. We also offer the venting components for this system.
By Lisa from Bluefield, West Virginia on October 8, 2013
I have a question concerning the dimensions of this firebox. My current rough fireplace opening is 40 inches wide and 32 inches in height. would this unit work within the existing space? You provide two sets of dimensions.
By Tyler M. - NFI Certified Specialist on October 9, 2013
The framing dimensions for the 36" firebox are 35 1/2" wide, 21 1/2" tall and 17" deep. You can see these illustrated on page 7 of the owner's manual
. This model is the BUF400.
By Ken from Claremore, OK on November 10, 2014
I'm wondering how strong the fan is on this firebox. Does it have variable speeds? Also, does the fan pick up heat from above the firebox or is it only from the sides and/or bottom?
By eFireplaceStore on November 11, 2014
Answer:The accessory fan for this model has a 200 CFM output, which is on the higher side of air movement for current blowers. The fan is on/off only, but it can be equipped with a thermal switch and rheostat control for automatic and variable speed operation. The fan picks up heat from the bottom, back, and sides of the inner firebox chassis.
By Steve from Charleston, SC on January 1, 2014
I am interested in this fireplace and would like to know what gas logs you recommend to purchase with it. Can you help me?
By Tyler M. - NFI Certified Specialist on January 2, 2014
This vent-free firebox can accept almost any of our 20" or 24" ventless gas log sets. Please see our full selection below:
Ventless Gas Logs
Be sure to choose the appropriate fuel type for your application (natural gas or propane), as these ventless log sets cannot be field-converted. If you have any questions about any particular log set or their pilot kits, please let us know.
By Karen from Tiffin, OH on April 25, 2015
Can this Majestic universal radiant firebox be used on an outdoor patio?
By Brennan W. on April 27, 2015
Answer:This firebox is not approved for outdoor use.
By Kimberly from Pocatello, Idaho on October 7, 2016
Is this a gas fire insert?
By Brennan W. on October 7, 2016
Answer:This is a vent free firebox, meant to be used in conjunction with a vent free log set.
By Kelley from Rocklin, CA on January 2, 2015
I am looking for a 36 inch wide wood burning, radiant heat firebox insert with glass doors. I was hoping to find one in an oil rubbed bronze color but black is OK.
By eFireplaceStore on January 2, 2015
By Jon from Fort Myers Beach, FL on September 20, 2015
What is the depth required to install this Majestic Universal circulating/radiant vent-free firebox with refractory brick liner?
By Will M. on September 21, 2015
The framing dimensions for a corner installation can be found on page 6 of the installation manual.
By Mario on November 9, 2012
Do you sell the brick panels only?
on November 9, 2012
While we do have replacement brick panels available, in general sizes and also some available for specific fireplaces, we do not offer any made specifically for this fireplace. You can check out one of our universal fit liners here:
Refractory Fireplace Panels
Please let us know if you have any additional questions.
By Ronald on November 9, 2012
Do you carry a vent free firebox that meets the following requirements:
- 36 inch viewing width
- For use with vent free natural gas log set
- Real firebrick instead of refractory liner
- For outdoor lanai installation
on November 9, 2012
By Troy from St. Marys, GA on May 12, 2015
I have a Majestic fireplace insert, model # 126001241. However, it is probably over 20 years old and is very similar to the Majestic Universal Radiant Firebox shown here. I need the refractory stone backing and floor of the fireplace. The side stone is OK but the floor and back pieces are cracked. Can I get these panels?
By Brennan W. on May 13, 2015
By John from Boston, MA on October 6, 2014
Do you have something similar with a sealed glass front? Also, do you have one where both sides open with glass fronts?
By Tyler M. on October 6, 2014
By Cesi from Hilton Head, SC on November 6, 2015
Is this Majestic Universal circulating/radiant vent-free firebox with refractory brick liner electric or gas?
By Chris C. on November 6, 2015
Answer:This is a vent free firebox capable of having electric or vent free gas logs installed.
By Lenny from Paramus, NJ on June 5, 2014
How many BTUs are there? Is this product legal in Paramus, NJ?
By eFireplaceStore on June 5, 2014
Answer:This firebox is rated to handle an indoor vent free log set with an output of up to 40,000 BTUs. Vent free appliances are allowed by code in New Jersey, however each local municipality may have their own codes enforced for this category of appliance. To be certain, I recommend contacting your local code office for verification.
By Meredith from Kansas City, MO on September 29, 2015
I have a gas line that I can run to this firebox. Is this Majestic Universal circulating/radiant vent-free firebox with refractory brick liner designed to be a gas insert? Do I need to get gas insert logs as well?
By Will M. on September 29, 2015
This is simply a firebox and will not include logs, however, most all 20" and 24" Ventless Gas Logs
will be compatible with this box.
By Hank from New York, NY on December 9, 2014
My back firebrick panel is cracked. How do I remove the side panel to get to the back?
By eFireplaceStore on December 10, 2014
Answer:Per the manufacturer, this model does have side retaining brackets/rails that are located at the top of each side refractory. Removal of those retaining brackets will allow you to tilt the side panels inward and remove them. This will then allow access to the back panel.
By Cheryl from Batavia, IL on November 28, 2016
I have this item, but the previous owner did not leave the owner's manual and I don't know how to light it.
By Will M. on November 29, 2016
Answer:This product is simply a firebox made for use with separately purchased vent free logs in natural gas or liquid propane. Subsequently, there would be no lighting instructions. To locate this information, you will need to locate the make and model number which should be locate on a set of metal tags that the installer likely tucked underneath the burner. From here, the manufacturer may be contacted for lighting instructions.
By Jack from NJ on November 8, 2014
Will a 27" Majestic Mojo firelog set fit in this firebox?
By eFireplaceStore on November 10, 2014
Answer:This set will indeed work with the model of firebox you are viewing now. The sizing should allow a couple of additional inches.