By Scott from Rexburg, ID on September 18, 2014
I want to convert my fireplace. There is a gas insert right now and I want to get rid of it and install a faux wood gas burning set up with a back wall like this. First, what are the full dimensions of it? Next, I assume it can be cut to size? My fireplace opening is about 3.5 feet wide and 3.5 feet deep. Is this a product you would recommend for this type of application? If not, what else do you suggest?
By Tyler M. on September 18, 2014
No, this is a model-specific liner kit only suitable for use within a Majestic 48" Marquis direct vent fireplace. If you do not have the manufacturer or model information of your fireplace, then we can offer universal replacement panels. We carry options for both woodburning fireplaces and gas fireplaces. If you have a woodburning fireplace (or a fireplace that originally burned wood but now burns gas), we do offer some universal refractory panels that will work for your woodburning fireplace. Please see the following links:
One 24"h x 28"w Panel
Two 24" h x 40"w Panels
These panels are about 3/4" thick and can be cut down to the size you need with a masonry blade or tile saw. They are suitable for use as side, rear and floor panels inside any manufactured woodburning fireplace.
If you have a fireplace that is only listed to burn gas (vent-free, direct vent or B-vent), please see these universal panel options:
El Dorado Decorative Brick Firebox Panel
Seville Decorative Brick Firebox Panel
Florence Decorative Brick Firebox Panel
Each of these panels measure 22.5" wide by 19.5" high and they are 1/2" thick. They can be cut to the size(s) you need.