Free shipping
Low Price
secure-order
View Cart

    Majestic FK12 Fireplace Fan Kit - For Direct Vent and Wood Burning Fireplaces

    220.50
    List Price: $279.99
    Sale Price: $220.50
    You Save: $59.49 (21%)
    In Stock.
    * Usually Ships Same Business Day.
    See complete product details >>
    Popular Accessories for this Item
    Product Details
    Manufacturer: Majestic
    Part Number: FK12
    eFireplaceStore Item Number: MAJ-FK12
    UPC: 642391016460

    Features

    • Fireplace fan kit
    • Includes chord
    • 160 cfm
    • Suitable for use with the following Majestic appliances:
      • Tribute Clean Face Direct Vent Gas Fireplaces
      • CDV Direct Vent Gas Fireplaces with Signature Command Controls
      • DVB Direct Vent Gas Fireplaces with Signature Command Controls
      • DVBH Direct Vent Gas Fireplaces with Signature Command Controls
      • Royalton Circulating Wood Burning Fireplaces
      • Sovereign Circulating Wood Burning Fireplaces
    Your Majestic fireplace is already an excellent secondary heat source, but did you know that there's an easy way to make it even more efficient and effective? Adding an FK12 Fireplace Fan Kit to your fireplace will improve its ability to distribute heated air and thereby allow you to warm a larger space with less fuel; in other words, you get better results for less money. And that's something any homeowner can appreciate.

    *Please Note: A separately purchased EB1 Fireplace Electrical Box is required for fan installation in Royalton and Sovereign Wood Burning Fireplaces.

    Customer Questions & Answers
    By Birgit from McGrady, NC on November 23, 2013
    I have a regular built, no brand, wood-burning fireplace and would like to get a blower or fan to get more heat going into the room. What can I use?
    By Collin C. - NFI Master Hearth Professional on November 25, 2013

    Answer:
    For a conventional masonry fireplace with no louvers, a grate heater would need to be used. An example is the Stoll 20 in. W x 17 in. D Grate Heater for Woodburning Applications. The heater pulls heat via conduction from the fireplace grate and forces the heated air in the exchanger tube to the room. Different sizes of the system are available to best fit your fireplace.

    By Mark from RI on July 24, 2014
    I have a Temco TLC 36-3 zero-clearance fireplace in my family room. Is this the fan model that I need?
    By eFireplaceStore on July 24, 2014

    Answer:
    The original fan needed for this model was the Temco BL-1. When this part was discontinued, the manufacturer started to specify the FK12 as a substitution. The fan kit works just as well as the original, but installation is a bit tighter.

    By Mark Coble from Phoenix on February 7, 2013
    Will this work for the Majestic NV360 RN?
    By Collin C. - NFI Master Hearth Professional on February 7, 2013

    Answer:
    This FK12 fan assembly is indeed the correct accessory item to be used with this fireplace.

    By John from Tennessee on January 10, 2013
    We have a gas fireplace insert that was installed in our woodburning fireplace. It is the Majestic Duzy 4 and the fireplace is VENTED and the fireplace front is screened with folding glass doors. Can we use this blower for our gas logs?
    By Tyler M. - Fireplace Specialist on January 10, 2013

    Answer:
    This FK12 blower is only listed for use with select Majestic and Monessen zero-clearance woodburning and gas fireplaces. The Duzy 4 is the model of the gas log set, not the firebox itself. Please reply with the model number of the firebox/insert and we will check available blower options, if applicable. We look forward to your response.

    By Rick from New Jersey on October 29, 2012
    How do I know what model fireplace I have and if it will accept a fan kit?
    By Kevin E. - Fireplace Specialist on October 30, 2012

    Answer:
    All manufactured fireplaces feature a data plate riveted to their body. This metal plate will list the manufacturer's name and the unit's model number.

    These plates are most commonly found in the upper right hand corner of the fireplace opening. It is possible that the screen will need to be moved in order to locate it. With this identification information, we'll be able to help cross-reference a blower for you.

    By Jennifer from evansville, indiana on August 27, 2012
    We purchased a home that has a wood-burning fireplace, and we'd like to make it more efficient by adding some type of mechanism to circulate the warm air.

    The fireplace itself is simply the firebox and a faux surround; when we moved in the previous owners didn't even have doors covering it! Would this fan kit provide what we need, or do we need a fireplace insert?
    By Collin C. - NFI Master Hearth Professional on August 27, 2012

    Answer:
    Typically, a blower is indeed a good way to circulate the warm air inside the fireplace chassis, and will assist in boosting the overall efficiency of the unit.

    Does the face of the fireplace have louvers/slats above and below the opening? If so, this is an indicator that a blower can be used.

    In order to select the correct blower assembly, you will need the manufacturer name and the unit's model number of the unit. Both can be found on the metal build tag which is usually on the interior of the fireplace, on the right side of the opening. Another possible location is the bottom of the fireplace, beneath the firebox floor.

    By Steve from Poolesville, MD on November 28, 2014
    What is the difference between your product and a universal blower for our Monessen CDV7 gas fireplace?
    By eFireplaceStore on November 30, 2014

    Answer:
    Most universal blowers use a rotary design just like this FK12, however the sizing of the blower may not be exactly what is needed for your application. Most blowers fit into a compartment that is very tight on space. As such, all universal blowers may not work.

    By Wes Theis from Ojai, Calif on March 3, 2012
    Can this item be adapted to fit an existing firebox?
    By Collin C. - NFI Master Hearth Professional on March 5, 2012

    Answer:
    While the blower may physically be able to mount into your existing fireplace, I highly recommend checking the manufacturer name and model number of the unit to determine if an exact blower is available.

    Please advise if you have this information available and I will be happy to look into this further for you.

    By Ron from OH on October 11, 2014
    I have a Temco DV 1200N fireplace and would like to add a blower to it. Is there an available kit?
    By eFireplaceStore on October 13, 2014

    Answer:
    The original blower for this model is no longer available, however the Majestic FK12 Fireplace Fan Kit - For Direct Vent and Wood Burning Fireplaces can be retrofitted to this model.

    By Allen Clarke from Foley, AL on December 1, 2016
    We have a Majestic Fireplaces Model NVBR36RN vented gas fireplace. Can a blower be added, and will it help (as right now all heat goes up the vent)?
    By Brennan W. on December 1, 2016

    Answer:
    Unfortunately, a blower can not be installed in the NVBR36RN.

    By Lauren from Troy, NY on October 16, 2013
    I have a DVB7 Series Direct Vent Gas Fireplace, model # 400DVBNV7. I'm looking to purchase a blower. What do you recommend?
    By Chris on October 16, 2013

    Answer:
    I would suggest the Majestic BLOT Variable Thermostat Forced Air Fireplace Blower for your Majestic 400DVBNV7 fireplace.

    By Daniel from Flint, MI on January 18, 2015
    Is the Majestic FK12 Firepalce fan kit the correct one for my Majestic fireplace model 39BDVR RN?
    By eFireplaceStore on January 19, 2015

    Answer:
    The FK12 is indeed a compatible fan kit for your particular model of fireplace.

    By Tyler from Spokane, WA on January 13, 2013
    I'm defacing my brick fireplace, and I want to add a fireplace fan blower kit. I'd like the fan recessed in the brick. Which of your products would you suggest for this?
    By Collin C. - NFI Master Hearth Professional on January 14, 2013

    Answer:
    For this type of application, I would recommend a high quality aftermarket fan, as they tend to be more reliable than the standard units that are offered by most manufacturers. One good model is the Skytech FK-165 Fireplace Blower Fan Kit. The ball bearing design and high CFM output make this universal fan a solid choice.

    By Todd from Lake Oswego, OR on November 3, 2013
    I just purchased a home that has an older MarGas (Marco Mfg) CCT 36 Natural Gas Fireplace. There's an outlet underneath for a blower, but no blower/fan. Do you know if this Fan Kit would work in my fireplace?
    By Collin C. - NFI Master Hearth Professional on November 4, 2013

    Answer:
    It is possible the FK12 will fit into your Marco fireplace, but I cannot say for certain. Each manufacturer produces their own specific fans for each model. Marco has since declared bankruptcy and was dissolved. As such, the original fans are no longer available and retrofit of another model is the only option.

    By Becky from Oregon on November 28, 2012
    I have a Majestic fireplace and want to blow the heat out into the room. What do I need? A blower kit or fan kit - what is the difference?
    By Magan B. on November 28, 2012

    Answer:
    Blowers and fans are the same thing. Each Majestic fireplace will have specific models of fans / blowers with which it is compatible.

    By Troy from Louisville KY on January 23, 2013
    I have a majestic Vermont Casting Gas fireplace, Model number NV360RN. I would like to install a fan and was wondering if the FK12 is the correct one to purchase? There is already a separate switch/wires installed with wire nuts on them.
    By Tommy H. on January 23, 2013

    Answer:
    According to the manufacturer, the FK12 is indeed the correct fan kit for the NV360 line.

    By Steve from Oak Park, IL on November 17, 2014
    I want to install a direct vent fireplace. Can you give me an idea of how much the efficiency increases in a direct vent fireplace if I added a blower fan?
    By eFireplaceStore on November 18, 2014

    Answer:
    The A.F.U.E. (burn chamber) efficiency will not change if a fan is installed, however thermal efficiency typically increases by 10 to 20 percent. This can allow some units to heat a greater area and encourages natural circulation in the room.

    By Joe from PA on February 19, 2015
    This isn't a very powerful blower. I have a Monessen BC36 wood burning fireplace which I purchased this fan for. Is this unit supposed to be a strong blower?

    By eFireplaceStore on February 19, 2015

    Answer:
    As is the case with other brands of fireplace equipped with fans, open faced units will have a fairly low output blower. The reason for this is because the force of moving air leaving the face of the fireplace can easily overpower the force of natural draft, causing smoke to spill into the room. However, using the blower will definitely induce a slow recirculating effect, which will more effectively heat the room.

    By Brenda Ferraro from New Orleans on February 4, 2013
    We have a wood burning fireplace that had two installed fans to blow the air out into the room. They were built in when the fireplace was originally built 30+ years ago. They have since flooded and we would like to replace them. Do you have such a product?
    By Tyler M. - Fireplace Specialist on February 4, 2013

    Answer:
    The only blowers we sell are model-specific, so unfortunately we cannot provide replacements for yours. We apologize for this inconvenience.

    By Lloyd from York, SC on February 20, 2015
    I have a new Vermont Castings CDVSC7 direct vent gas fireplace and I am considering adding a blower. It does not look like a complicated process and I am considering installing it myself. Do you sell a blower kit that will fit my fireplace? I would like one that has thermostat control.
    By Kevin E. on February 20, 2015

    Answer:
    From the part number that you've provided, it appears you have the Signature Command version of the CDV fireplace. As such, there is only one blower for you. It is the BLOTSC. Please note that this blower requires the addition of the SCSACM control module and the TSFSC remote for proper operation.

    By Nate from Etters, PA on February 13, 2015
    Will this fit on my Majestic model 36BDVRRP fireplace?
    By eFireplaceStore on February 13, 2015

    Answer:
    This is indeed the correct fan assembly for your model of fireplace.

    By Tariq Saleha Qazi from Colonial Heights, VA on November 23, 2016
    I have a Majestic 36BDVRRP gas fireplace. I want to install a blower fan in it to circulate the air. Can you tell what type of thermostat goes with this model

    By Val from Billings,MT on October 12, 2016
    Will this fan work for my Majestic fireplace, model #DVR39RN?

    By Brennan W. on October 12, 2016

    Answer:
    Unfortunately, the blower for your unit is no longer available.

    By Randy from Albany, OR on December 31, 2014
    Will this blower fit on my Majestic Direct Vent Fireplace? The model number of my unit is 36LDVRRN.
    By eFireplaceStore on December 31, 2014

    Answer:
    This blower will indeed fit your model of fireplace. The unit was originally configured to use the FK24 and FK12 fan kits. The FK24 has since been discontinued, with the FK12 as the only option.
    By Larry from San Francisco, CA on January 1, 2015

    Answer:
    FK12 Fireplace Fan Kit.
    Yes I found the fan kit very helpful and works well on my Majestic DVBR42.

    The real story: Check your home owners manual for accessories. If you don't have a manual you can download one, or a similar one. In the manual look for the optional accessories for that model. See if FK12 is there. Chances are it will be. From my research this kit works on just about all 36 to 52 inch models.

    Installation Fact: The fan kit does NOT have control switches. You need a power supply in your Majestic to run it. It has to be installed in the back (behind the burner) sometimes which can be a problem for smaller models. (The owner's manual should show how and where.)

    Customer Reviews
    Majestic FK12 Fireplace Fan Kit - For Direct Vent and Wood Burning Fireplaces ( 220.5 )
    4.5 out of 5 Stars based on 9 review(s) - sorted by Most Helpful Customer Reviews

    Nice Replacement Fan
    By
    Stephanie Jackson
    from Pennsylvaniaon
    October 2, 2013
    I would recommend this item to a friend.
    First off, let me say that overall this is a good replacement fan. It’s economically priced, and in my case it’s better than the fan that came with my fireplace originally. I do have a few small complaints, though. I wish it attached with Velcro rather than magnets. I think that would cut down on the noise, which is somewhat of a distraction. Also, one of the wires came loose. I was able to fix it pretty easily, but still…. But I don’t want to sound too gripey. Other than those small issues, we really like it.

    Magnets and Thermal Switch Really Help
    By
    Ann Simmons
    from Illinoison
    May 25, 2013
    I would recommend this item to a friend.
    I like the magnets on this unit, which are very helpful when you’re inserting it. And I recommend you get the Thermal Switch too, so it can turn itself on and off, depending on how hot the stove is. I haven’t found the noise of the blower to be a problem. I’m happy with it and would recommend it to others.

    Install It Right and Reduce Noise
    By
    Edward Green
    from Utahon
    April 29, 2013
    I would recommend this item to a friend.
    Sometimes people complain about the noise these blowers cause. Yes, they do cause noise, but we’ve found it’s worth it for all the benefits of having the blower. And we also found that if you install the blower correctly, using the magnets and making sure everything is put together tightly, it minimizes the noise. We figured this out even though there weren’t any instructions included (which was disappointing). Before we put this blower in, the fireplace area and walls around it would get really hot, but the heat didn’t spread evenly throughout the house. It kind of made us nervous, frankly, when the walls and mantel would get so hot. Now we feel safer, and we’re saving money too, because the stove now heats a larger area more efficiently.

    Bought Two of Them
    By
    Julie Griffin
    from Ohioon
    March 10, 2013
    I would recommend this item to a friend.
    We have two fireplaces without vents in our house, so I purchased two of these. They came fast and weren’t damaged during shipment. I put them in easily and quickly. The only slight down side is that they are somewhat noisy, but not unreasonably so. They’re well worth the money and do the job.

    Better than the Original
    By
    Lillian Cook
    from Iowaon
    August 28, 2012
    I would recommend this item to a friend.
    My fireplace came with a blower, but it was really noisy and really didn’t circulate the air well. When it died, I bought this one and really like it—it’s quieter and it really propels the heat out. It was easy to install, too, because of the magnets. Just took a few minutes. I’m very happy with it!

    Very Easy to Install
    By
    Frank Brooks
    from Idahoon
    June 28, 2012
    I would recommend this item to a friend.
    I was happy to get the blower in the mail and see how well it had shipped and to have it arrive in good shape. The magnets make it a cinch to mount—really, anybody could do it. Once installed, it doesn’t make much noise and really dissipates the heat throughout our home.

    Good Price
    By
    Jerry Ross
    from Indianaon
    December 30, 2011
    I would recommend this item to a friend.
    Considering how little it cost, this was a great purchase for our family. Not only was the initial cost low, but it keeps saving us money by spreading the heat throughout the house. The noise doesn’t bother us at all—we think of it as the sound of saving money!

    Saving Us So Much Money
    By
    Michelle Henderson
    from Oregonon
    October 28, 2011
    I would recommend this item to a friend.
    The old saying, “It pays for itself” is true about this unit. Our heating bills are definitely lower since we installed it. Yes, the unit makes some noise, but that really doesn’t bother us because it’s so efficient. It was easy to put in too, and I’m no home handy man!

    It's OK
    By
    Jennifer Peterson
    from Oklahomaon
    May 25, 2011
    I would recommend this item to a friend.
    Now that I have the blower in and it’s working, I’d say it was a good price and I’m glad I got it. But it is rather noisy, and when we were trying to put it in, a couple of solders broke, and I had to resolder them. You might want to be sure you know somebody who has a soldering iron before you order, just in case you have the same problem we did.



    test
    +

    Let Our Experts Design
    Your Venting System

    +

    Find the Right Gas Logs
    For Your Fireplace

    Sign-up for our Email!
    Enter your email for new arrivals and special offers.