By Cathy from Cleveland, OH on March 24, 2016
How wide are the legs of this Pearl Mantels Mantel?
By Chris C. on March 24, 2016
Answer:The legs are 5" wide.
By Bev Vicstein from Bloomington, IN on October 20, 2014
I'm looking for a very basic wood surround for a gas fireplace and I am having trouble finding the correct size. My opening width is only 45" and opening height is 29". Do you have anything that might fit?
By eFireplaceStore on October 21, 2014
By Scott from Virginia on April 7, 2012
I have a gas fireplace w/ marble surrounding. Want to replace basic trim with something more like this. The width seems ok, it's 48" but the height is a few inches shorter than the interior height of 42" shown for this mantel kit. Can the legs be cut down a little?
By Kevin E. - Fireplace Specialist on April 9, 2012
Answer:While we do not custom make mantel surrounds, you would definitely be able to trim down this mantel to fit your needs. The one thing to keep in mind, though, is that trimming the bottom of this mantel would mean trimming the decorative plinth. This may detract from the finished appearance of the mantel.
By Ophelia from GA on January 21, 2016
Which size of hits Pearl Mantels 110 Wiliiamsburg unfinished fireplace mantel would give me approximately a 60" shelf exterior?
By Will M. on January 22, 2016
Answer:A 48" interior opening would would have a top shelf length of 64".
By Dominick from Rocky Point, NY on November 29, 2014
Can I apply this mantel to a brick wall?
By eFireplaceStore on November 30, 2014
Answer:You can indeed. In order to mount the wall cleat, you will need a masonry bit and a hammer drill to install anchors into the masonry. Once this is complete, you can mount the mantel as you would normally.
By Andrew from Union City, CA on February 11, 2017
Is there any mantel with the shelf length of 60 inches?
By Will M. on February 13, 2017
By Alex from CT on November 4, 2013
I just want to confirm that there is no MDF or other high-VOC component in this. Is it, in fact, solid wood?
By Collin C. - NFI Master Hearth Professional on November 5, 2013
Answer:Per the manufacturer, this product is indeed produced using all solid hardwood with no MDF or any other high density finishing materials.
By Mason from Chicago, IL on May 4, 2013
How is this mantel installed?
By Collin C. - NFI Master Hearth Professional on May 6, 2013
Answer:In order to install this item, the legs must first be attached to the breastboard using the supplied hardware. The legs will have tapped holes that correspond to the breastboard. The included wall cleat must then be mounted to the wall or masonry, using anchors. The entire assembly will then attach to the cleat.
By Terry from Long Island, NY on August 6, 2014
Can I nail it to the wall in a new construction?
By eFireplaceStore on August 7, 2014
Answer:The surround will come with a wall cleat for mounting the assembly, but it is also possible to use finish nails to secure the legs to the wall as well.
By Bryan from Arnold, MO on August 8, 2015
What is the depth of this Pearl Mantels 110 Williamsburg unfinished fireplace mantel below the shelf?
By eFireplaceStore on August 10, 2015
Answer:Excluding the shelf, the remaining mantel depth is 3 3/4 inches on average.
By Jay from SC on August 10, 2015
Answer:3 Inches in depth.
By Steve from FL on August 11, 2015
Answer:The mantel is 3.5" deep under the shelf. It was easy to finish and looks great. I've had nothing but compliments from friends and family.