Part Numbers: G4522401N, G45-2-24-01M
eFireplaceStore Item Number: PTS-G45-2-A-24-EPK-1N
If you want to do something a little bit different with your gas log set, then consider this Peterson Real Fyre ANSI Certified Triple T See Thru Gas Log Burner System. It produces the same realistic flames and natural look you would expect from any Peterson burner, but with a unique improvement. The ANSI Certified Triple T features a T-shaped burner that emphasizes its front embers, giving them an even greater dramatic effect, and adds depth to its flames. This unique design also maximizes the warmth you get from your gas logs by bringing the flames closer to your fireplace opening.
This is a vented gas log burner that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. Vented Gas Log sets, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log burner comes with an Electronic Ignition Remote Ready Valve System. The electronic ignition system does not stay lit when your logs are turned off. There is not a standing pilot light. This feature saves energy because you are not burning gas when the logs are off. It is battery operated, so there are no wires needed. The system does not have variable flame height control thus the flame will always be the same height. The control valve and regulator is ANSI certified and is pre attached to the burner.
Remote Control Options For This Pilot Kit:
* This is a Natural Gas Log Burner. Please verify that you have the correct gas type.
This is a gas log burner only. You must purchase the gas logs and, if desired, pilot kit separately to have a complete gas log set or you can purchase one of our complete gas log sets.
* The fireplace's Middle Width must be at least 34 Inches and the Depth must be at least 17 Inches for this gas log burner to fit. You can calculate the middle width of your firebox by measuring the width (left to right) approximately half way back in the firebox. If you have any questions, please contact our customer service department and we will be happy to assist you in finding the perfect size gas log set.