Part Number: HRDG45A-30N-SS-SPK-26
eFireplaceStore Item Number: PTS-HRDG45A-30N-SS-SPK-26
You can bring all of the rustic charm of a quiet little cabin in the woods into your own home with a set of Real Fyre Rustic Oak Designer Gas Logs by Peterson. Rustic Oak Designer Gas Logs are made of the same high-quality materials and have the same steel reinforcement bars that all Peterson Real Fyre Gas Logs do. However, these gas logs feature handpainted details that perfectly recreate the warmth and feel of an old country inn fireplace. The Real Fyre Rustic Oak Designer Gas Logs by Peterson blend the speed and convenience of modern life with the old-world, rustic charm of a simple evening in the country.
The Real Fyre G45 Glowing Ember Stainless Steel Burner creates dancing flames and a maximum glowing ember effect. With this cutting edge Outdoor G45 burner, you will enjoy a beautiful outdoor fireplace with dancing flames and glowing embers. Dazzle your family and friends with a beautiful set of fireplace logs in your outdoor fireplace! You'll enjoy many hours and memories gathering around the fire.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set comes with a Manual Safety Pilot Kit. The manual safety pilot is the most basic safety pilot. It is a standing pilot light which stays lit indefinitely. To light the log set or to turn the flame up and down, you simply turn the knob on the pilot kit. This knob is located on the actual pilot kit which is attached to the burner system.