Part Number: RDPG45-2-20-APK-17P
eFireplaceStore Item Number: PTS-RDPG45-2-20-APK-17P
The Real Fyre Golden Oak Designer Plus Gas Logs by Peterson are one of the most popular models of Peterson Real Fyre gas logs because of their combination of beauty and function. The logs themselves are made of superior refractory ceramics, expanded shales, and aggregates reinforced by steel rods that provide maximum integrity and prevent breakage. The exterior of the gas logs feature handpainted details that create a uniquely realistic look. Adding to the realism are the holes in the top of the gas logs that allow flames to come through, completely mimicking the look of a natural fire. Real Fyre Golden Oak Designer Plus Gas Logs by Peterson provide the perfect mix of authentic fire-like appearance, rugged durability, and maximum performance for your home and fireplace.
The Real Fyre See Thru G45 Triple T Burner is an advanced system that creates dancing flames, maximum glowing effects and provides radiant heat into the room. See thru gas logs will have a special burner that causes the flame to come from the front, back, and middle of the logs. The logs and grate are also the same width in both front and back. With this cutting edge G45 burner, you will enjoy a more realistic looking fireplace and more glowing embers.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set comes with a Variable Flame Remote Ready Pilot System. The variable flame remote ready pilot system allows you to control your system using a remote control, wall switch, or the manual knob on the burner system. This system does have variable flame height control to turn the fire up and down. The set is compatible with the basic variable remote control (VR1a), which will simply turn the unit on/of and adjust the flame height. It is also compatible with the deluxe variable flame remote control (VR2a), which will turn the unit on/off, adjust the flame height, and will also control the room temperature. The wall switch option (WS3) allows you to turn the unit on/off using a switch on the wall.
What to Know When Buying Gas Logs
Which Gas Logs Are the Right Size for Me?
Selecting the Right Gas Log Accessories