Part Number: 4VFT-TRS
eFireplaceStore Item Number: CPF-18403
*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
This VFT tee is made out of 304 stainless steel alloy. The tee comes with an 8 inch removable take off. It is made for a four inch pipe. Installation is made easy if used with the Ventinox liner with the Fas N Clamp fitting on the top. Made by Ventinox, the VFT tee will work with and be compatible with other Ventenox venting and chimney products. The too is available in various sizes from three inches to twelve inches.