Part Number: 10VFT-X15
eFireplaceStore Item Number: CPF-18723
*Venting Requirements: This unit requires venting pipe with an inner diameter of 10 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
* Please Note: This item can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled.
*Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.
The Ventinox VFT liner is a lightweight liner with a 0.006" thickness, but its continuous weld construction creates a spiral backbone that makes it both strong and flexible. This item provides a pre-cut 15' length of 10" diameter pipe. The pipe should be installed with two wraps of 1/4" Foil-Face FlexWrap or a minimum of 1" of TherMix to achieve the UL listing for wood or coal applications. When properly installed and insulated it permits a zero clearance. The Ventinox VFT system has a manufacturer's lifetime warranty for wood, oil, pellet, and gas applications and a 10-year warranty for coal.