Part Number: 11VFT-X10
eFireplaceStore Item Number: CPF-18732
*Venting Requirements: This unit requires venting pipe with an inner diameter of 11 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
* Please Note: This item can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled.
*Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.
Ventinox liner is lightweight with only a 0.006" nominal thickness but its continuous weld construction creates a backbone that is both strong and workable. The Ventinox pipe can be ovalized or even bent without kinking. This section is 11" in diameter and is made of 0.006" 316-Ti alloy. In order to get the optimum performance it should be insulated with 2 wraps of 1/4" Foil-Face FlexWrap or a minimum of 1" of Thermix insulation to permit the UL listing for wood or coal applications. It meets the UL 1777 standard for zero clearance to combustibles when insulated properly. It has a manufacturer's lifetime warranty for wood, oil pellet and gas applications and a 10-year warranty for coal.