Part Number: 21111
eFireplaceStore Item Number: CPF-21111
*Venting Requirements: This unit requires venting pipe with an inner diameter of 5 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
* Please Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.
This connector/adaptor works with the 5" diameter HomeSaver UltraPro chimney liner system to connect two sections of liner. It has made from 18-gauge 304-alloy stainless steel and has two attached band connections. The advantage of a band connection is that the pieces simply slide together and can be secured with a few twists of the screwdriver. You don't have to mess with rivets or screws that can end up falling all over the floor, and the pieces are joined quickly and securely so that you save both time and effort.