HomeSaver RoundFlex Connector-Adaptor for 6 inch Chimney Liner

RoundFlex Connector/Adaptor for 6-in. pipe
Necessary for the "male-end-down" joint
For use when mating RoundFlex on top to rigid pipe below
Uses rivets, not included
Note: A connector/adaptor is not needed when mating rigid pipe on top to flex pipe on bottom

See complete product details >>

Product Details

Free Venting Design & Quote:

Manufacturer: HomeSaver
Part Number: 21607
eFireplaceStore Item Number: CPF-21607

Features

RoundFlex Connector/Adaptor for 6-in. pipe
Necessary for the "male-end-down" joint
For use when mating RoundFlex on top to rigid pipe below
Uses rivets, not included
Note: A connector/adaptor is not needed when mating rigid pipe on top to flex pipe on bottom

*Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.

* Please Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.

The HomeSaver RoundFlex for Chimney Liner is necessary for the "male-end-down" joint in your chimney liner installation. This Liner is for use when mating RoundFlex on top to rigid pipe below, and it uses rivets which are not included. The HomeSaver RoundFlex for Chimney Liner is the easy and affordable way to finish your chimney lining job and get back to doing the things you want to do. Note: A connector/adaptor is not needed when mating rigid pipe on top to flex pipe on bottom