Below is a list of chimney components that are compatible with this item. If you are comfortable picking the components that you need for venting this item, please choose from the items below. If you need any help at all, please use our FREE advice from our certified fireplace specialists.
Ember bed burner with fiber ceramic logs (standard) and lava rock
Easy access control door
BTUs: 33CFDV-18,000; 36CFDV-21,000; 42CFDV-24,000
Uses SLP pipe
Natural gas and propane gas field convertible
Variable manual Hi/Lo flame control (optional remote Hi/Lo available)
Optional field installed Cottage Clay firebrick, Cottage Red firebrick, or Black porcelain panels
FE (Fireplace efficiency as per CSA P4) listed
Junction box with wall switch
18" flex line with On/Off shut-off valve included
CSA design certified
Includes certified safety barrier
IPI CONTROL STANDARD FEATURES:
Cold climate pilot optional setting
Battery back up
Variable Hi/Lo flame control
IPI CONTROL OPTIONAL FEATURES:
Hand-held remote control
Three step remote flame control (includes RMSC remote and receiver)
*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
This unit is run under the Millivolt ignition, which means that it works with several remote options. One of the features that it is known for is it safety first feature. Since the inserts were designed in order to provide maximum BTUs for the best heating solution, the units will feel hot to the touch. However, all direct vent fireplaces from Monessen comes with a certified safety barrier which can be affixed to the fireplace, thus ensuring your protection. This barrier has also been tested by a third party testing company to conform to the standards required in the fireplace industry, for your safety.