Below is a list of chimney components that are compatible with this item. If you are comfortable picking the components that you need for venting this item, please choose from the items below. If you need any help at all, please use our FREE advice from our certified fireplace specialists.
Field Convertible Vent Technology to vent horizontally or vertically
Uses DVP pipe which can be converted to SLP pipe for vertical, vertical/horizontal applications (see install manual for details)
Premium Log Set and Glowing Ember bed
Thermal Efficiency up to 80%
Natural Gas and Propane Gas Field Convertible
FE (Fireplace efficiency as per CSA P4) listed
18" flexible connector with On/Off valve included
CSA Design Certified
Includes certified safety barrier
SIGNATURE COMMAND (SC) CONTROL FEATURES:
A/C powered with battery back up. (Can be installed battery power only if A/C power is not available.)
Cold climate pilot optional setting
Hi/lo 3 step flame adjustment
Optional hand-held remote ready
Touch button command center
Comes standard with 15' of wire and On/Off wall switch
*Venting Requirements: This unit requires venting pipe with an inner diameter of 5 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
One very important feature of this model is Safety First capabilities. The inserts were primarily designed to provide maximum BTUs in order to offer the best possible heating solutions for the privacy of your home. The units will be expected to become hot to the touch. However, the good news is that all direct vent fireplaces under the Monessen brand is equipped with a standard certified safety barrier, which is affixed to the fireplace. These barriers are also approved through the help of a third party testing agency in order to conform to particular standards that are designed in order to prevent injury out of touching the hot glass.