Part Number: POG45-2-20-NONEN
eFireplaceStore Item Number: PTS-POG45-2-20-NONEN
Rugged detail is the key feature to Real Fyre Post Oak Gas Logs by Peterson. These gas logs feature deep bark details on the exterior that give you the impression of a fire built from old oak posts that you cut in the yard. It's a distinctive, comforting appearance that puts you in the mindset of an evening on the farm or in the country. These Real Fyre Post Oak gas logs, of course, are backed by Peterson's commitment to using the best manufacturing materials, steel reinforcement rods, and superior surface detail. This is a really great look with unique detail. Real Fyre Post Oak Gas Logs by Peterson are the perfect choice for a distinctive look in any fireplace or home.
The Real Fyre See Thru G45 Triple T Burner is an advanced system that creates dancing flames, maximum glowing effects and provides radiant heat into the room. See thru gas logs will have a special burner that causes the flame to come from the front, back, and middle of the logs. The logs and grate are also the same width in both front and back. With this cutting edge G45 burner, you will enjoy a more realistic looking fireplace and more glowing embers.
This is a vented gas log set that must be installed in a fully vented wood burning fireplace. With vented gas logs, you'll enjoy a large, realistic-looking flame that operates with an open chimney flue, or damper. These logs, which simulate a wood-burning fire, are the most realistic type of gas logs but, just like real fires, lose some of the generated heat up the chimney. Vented gas log sets are the most popular type of gas logs sold. Professional installation is recommended.
Sets include handcrafted logs, custom grate, Real-Fyre Burner System, Granules (sand or vermiculite), Glowing Embers, grate clips/log locators, pan/connector kit and damper clamp.
This gas log set is a Match Light system and does not come with a pilot kit. The fire is lit using a long match or lighter while you turn on the manual gas valve either on the floor or in the wall. The flame height is then controlled by adjusting the key valve. If you do not have a valve currently, you will need to purchase either the AV-17 or the AV-18.