Home Fireplace Accessories Stove Boards
American Panel Hearth Classic 54 x 54 Classic Edge Type 2 Corner Hearth Board

American Panel Hearth Classic 54 x 54 Classic Edge Type 2 Corner Hearth Board

Write a Review
$1,296.95
Was $1,599.99
Save $303.04 (19%)
countdown clock icon
HURRY! Deal ends in 11h 32m 28s
Qty: 1

Special Order: Usually ships within 3-4 weeks

Have questions?

Our NFI-certified experts are here to help!
Chat with us Chat With Us
Email your question Send a Message
Call us at 800-203-1642 Call 1-800-203-1642

Product Details

Manufacturer: American Panel
American Panel Part Numbers: C-54-CR-CHAR-T2
Item Number: AMP-C-54-CR-CHAR-T2
The American Panel Hearth Classic 54 x 54 Classic Edge Type 2 Corner Hearth Board really amps up your fireplace's look with its neat design. This hearth pad is a breeze to work with because it's about 30% lighter than many others out there, making installation much simpler. It's built tough with extruded, tubed aluminum that gives it some serious strength, and the powder-coated finish looks sharp. You'll appreciate how it offers a higher R-Value compared to different substrates, meaning it does a solid job managing heat. Plus, its construction helps create a great surface for tiles to stick to, and special plugs on the frame make sure you get perfectly square hearth pads every time.

Please Note: Current tile offerings are subject to change, and the actual color of tile may vary from the product picture.

Also Note: Item provides both thermal and ember protection as a Type 2 stove board.

Customer Q&A with Product Specialists

Susan R. from Shutesbury, MA asked:
Hello, I have a VT Bun Burner (21.6" x 21") to install over a wood floor. The specs state the board should have an R-value of 0.84 BTU/In. How does that translate to R-value? The product description mentions it should be 1 inch thick. Do people usually put tiles on this hearth board, or use it as is? And how much does it weigh?
Hello, I have a VT Bun Burner (21.6" x 21") to install over a wood floor. The specs state the board should have an R-value of 0.84 BTU/In. How does that translate to R-value? The product description mentions it should be 1 inch thick. Do people usually put tiles on this hearth board, or use it as is? And how much does it weigh?
This Classic Edge Type 2 Corner Hearth Board has a published R-value of 2.24, which, as shown in the manufacturer's installation manual, is above the minimum R-value of 1.0 required for a Type 2 hearth pad. We do not have documentation confirming how a 0.84 BTU per inch figure applies to this specific board; therefore, for this installation, we would rely on the R-value of 2.24 rather than attempting to convert that figure. The frame on this board is 1 inch, with a single 1/2 inch non-combustible substrate inside providing thermal protection. This board ships with its tile finish already applied at the factory in the selected color, making it ready to install as is without needing additional tile. It weighs 203 lbs. Because hearth pad requirements can vary by stove, we recommend confirming the minimum R-value your specific stove's installation manual calls for before installation.
Answered by: Tyler M. on Sep 28, 2026

Helpful?

0
Showing 1 of 1 Questions and Answers
Ask a Question

Customer Reviews

Write a Review
chat-bot-icon