Broan 36 Inch Eclipse Downdraft Vent Hood

We are unable to confirm this as a direct drop-in replacement for a Dacor downdraft. Direct swaps between different brands are rare, and no Dacor models are listed in the specifications for this Broan unit. Here are the specifications for the Broan Eclipse 36 Inch Downdraft (model 2736) for comparison with your existing unit: * **Size:** 36 inches wide by 29 1/2 inches high. The air vent rises at least 7 inches above the cooktop when raised. It installs in most standard 36-inch wide cabinets, though Broan recommends an oversized cabinet for easier installation. * **Ductwork:** Requires a 3 1/4 inch by 10 inch rectangular duct or a 6-inch round duct with a transition. The blower discharge can be configured for left, right, or down venting and slides 7 1/2 inches side-to-side, offering flexibility for existing ductwork. * **Power:** Plugs into a standard 120 VAC, 60 Hz grounded outlet. * **Countertop Requirements:** The back of the downdraft cut-out should be 1 3/4 inches from the cooktop, and 2 inches of flat countertop is required behind the cooktop. The countertop opening size is not universally fixed. The unit includes a template to trace around your cooktop's back flange for creating the correct opening, as cooktop depth influences the fit. Your existing Dacor opening may or may not be compatible. Detailed information can be found in the installation guide and specification sheet.

According to the installation manual, you can remove the filters from the air vent by grasping the tab at the top of each filter.