- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - Fireplace Mantels
- Fireplace Accessories
- Chimney Products
- Outdoor Fireplaces
FireplacesFireplace InsertsStovesGas LogsFireplace MantelsFireplace AccessoriesChimney ProductsOutdoor FireplacesMy AccountOrder StatusHelp
image {{ pictureNum }} of {{ imageArray2.length }}
× 
Ask a Fireplace Specialist:
|
HomeSaver Pro 7 Inch Round Chimney Cap for Air-Insulated Factory-Built Chimneys
Product Details
Part Number: WSA-7TDW eFireplaceStore Item Number: CPF-11415 UPC: 00076335069449 Features
This chimney cap is made by HomeSaver to create a tight fit around the termination of your chimney system. This chimney cap can fit perfectly around almost any factory-built chimney, and it can be a perfect replacement for your rain cap if it is deteriorating or defective. This chimney cap combines a spark arrestor with a rain cap in order to insulate the walling in your chimney system, and it allows you to cover the end of your chimney and prevent water and debris from entering and damaging your fireplace. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
Customer Reviews
Review Summary
4.9
15 Reviews
5
87% (13)
4
13% (2)
3
0% (0)
2
0% (0)
1
0% (0)
60% Recommend this product (9 of 15 responses)
By Jack from
Florida on December 1, 2018
I would recommend this item to a friend.
Great
Easy to install and looks good to me
By Tom from
Putnam, CT on May 13, 2018
I would recommend this item to a friend.
Great replacement part!
This cap was ordered to replace the cap on my air cooled Majestic chimney. It fit perfectly, took only a couple minutes to install and is a much simpler cap to remove when it comes time for chimney cleaning. The OEM part required replacing after about five years...This one is made of stainless steel and should last much longer. I wish I had purchased this years ago.
ProsSimple design to install
Clean looking
Rustproof
Simple to remove for cleaning
ConsNot cheap
By Neil from
Frenchburg on December 7, 2016
I would recommend this item to a friend.
Fit perfect!
This bonnet fit perfectly after my flu was installed 30 years ago. Couldn't be more pleased.
Prosgreat Fit
By Dan from
BRICK on January 12, 2016
I would recommend this item to a friend.
Chimney Cap Fitment
Great item, fast shipping! Great customer service!
ProsStainless Steal, good cage!
By James from
Robbins, California on December 7, 2015
I would recommend this item to a friend.
Product DOES what I needed it to do - no Worries.
Very good item and this is why!
1: Communications with eFireplaceStore was as it should be; easy!
2: Item was shipped promptly.
3: Chimney Cap fit my 40 year 8" stack perfectly and with ease.
4: Chimney Cap has weathered 3 storms with no leaks or being blown out by wind etc.
5: Again "product does what I need it to"
ProsFor me, ease of installation, it looks good and it works great!
Consfeels a little tinny but works fine.
By Thomas from
Rome on November 25, 2015
I would recommend this item to a friend.
needed to keep rain out of chimney
easy install and cap design is very effective.
By James J. Gilmore from
United States on December 4, 2014
I would recommend this item to a friend.
These guys made it easy.
From ordering the correct product, to prompt shipping and final arrival of my chimney cap eFireplace Store made it all incredibly easy and at a great price to boot.
By Rod from
Wisconsin Dells,Wi on October 31, 2014
I would recommend this item to a friend.
Built well
Built well- a little pricey - but will last a ling time.
By Bill from
Huntingtown,Md. on September 17, 2013
I would recommend this item to a friend.
Home saver Pro 7 Chimney Cap
Great Quality and was a breeze to install.
ProsEverything
ConsNothing
By José from
on February 3, 2011
Review for
FAST shipment. I had it installed three days after ordering. Took me 20 minutes to install, including climbing and getting dowm from the roof. Fit perfectly.
By sam jones from
on December 16, 2010
great deal
awesome cap. just what I needed. quick shipping!
By bill from
on November 25, 2010
Review for
this product is well constructed and easy to install. I also found efireplace to be of great assistance and prompt in the questions I had. Their price was also the best available.
By bill from
on November 25, 2010
Review for
By Mike from
on June 19, 2010
8" ss chimeny cap
Very happy with my experiance with Elite Deals.
Pro's -
Ordered one day, delivered one day later.
Looks good, installs easily, construction seems solid.
Con's -
I would have prefered a tighter mesh spark arrester. Mounting is a friction fit. While it is tight, I am concered about our hurricane and Nor'ester force winds. I will probably build my own ss security tabs. Maybe "Elite Deals" would like to sell them for me, as an accessory.
By Dean from
on February 9, 2010
Superior product & Service
Timely delivery. Superior product price/value. DIY Instructions could have been clearer about friction fit collar. Easy access to clean flue. I will consider this vendor for future on-line purchases.
Email to a Friend
Share on Facebook
Share on Twitter
Share on Google+
Pin it on Pinterest