Part Number: INK-825
eFireplaceStore Item Number: CPF-17029
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
* Please Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.
8 inch x 25-ft. Super Wrap Chimney Liner Insulation Kits are perfect to supplement the separate purchase of a Super Wrap chimney reliner of the size corresponding to the component kit. The kit does not include the reliner pipe, but it does include FlexWrap cut to correct length and wrap width, ArmorMesh, aluminum tape, a clamp kit, and spray adhesive.
Absolutely everything you need to get your relining project started and finished. If you have the liner taken care of but you don't have the hardware to see the project all the way through, give your chimney liner installation the boost it needs by picking up a 8 inch x 25-ft. Super Wrap Chimney Liner Insulation Kit before wasting any more steps.