facebooktracking
Free shipping
Low Price
secure-order
View Cart
logo

    6 inch x 25-ft. HomeSaver UltraPro 316Ti Alloy Chimney Re-Liner Pipe

    419.60
    List Price: $519.99
    Sale Price: $419.60
    You Save: $100.39 (19%)
    In Stock.
    * Usually Ships Same Business Day.
    • 6-in. diameter UltraPro 25-ft. Liner
    • 316 Ti-alloy construction with .005" wall thickness
    • Resists corrosion and high heat
    • Superior crush resistance, with flexibility and resiliency
    • Engineered to be stronger and lighter than any other pipe
    • Patented roll-lock seams are gas tight
    • UL Listed to 1777 Standard for zero clearance and ULC Listed to S635-00
    See complete product details >>
    Product Details
    Free Venting Design & Quote:
    Manufacturer: HomeSaver
    Part Number: 17628
    eFireplaceStore Item Number: CPF-17628

    Features

    • 6-in. diameter UltraPro 25-ft. Liner
    • 316 Ti-alloy construction with .005" wall thickness
    • Resists corrosion and high heat
    • Superior crush resistance, with flexibility and resiliency
    • Engineered to be stronger and lighter than any other pipe
    • Patented roll-lock seams are gas tight
    • UL Listed to 1777 Standard for zero clearance and ULC Listed to S635-00


    *Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
    * Please Note: This item can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled.

    *Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.

    The 6 inch x 25-ft. HomeSaver UltraPro 316Ti Alloy Chimney Re-Liner Pipe is a direct reflection of HomeSaver UltraPro's custom machining and superior engineering. HomeSaver UltraPro chimney liners begin with .005-in. thick 316Ti stainless steel which is then vertically corrugated by high-tech machines. A patented roll-lock seam is applied that yields greater strength and increased flexibility compared to more traditional or generic chimney liner pipes.

    HomeSaver UltraPro reliner pipes are much easier to work with than other reliners, allowing for easier installation and, for chimney professionals, more installations per day than with other pipes. UltraPro pipes even comes ready to use out of the box, not a coiled, kinked mess like many reliners.

    HomeSaver UltraPro pipes are easy to work with, more reliable, and have a greater crush strength than similar pipes of even greater thickness. Homeowners and chimney professionals alike will agree that the 6 inch x 25-ft. HomeSaver UltraPro 316Ti Alloy Chimney Re-Liner Pipe is the safest, most convenient, and most effective reliner of its kind on the market.

    Customer Questions & Answers
    4 Questions & 4 Answers
    Tom
    from Ridgefield, CT. asked:
    September 13, 2017
    May this be used for a residential oil boiler?
    1 Answer
    The UL 1777 listed liners can be used for the natural draft venting of Category I gas-fired, Type L vented oil-fired, and solid-fuel-fired residential-type appliances in which the maximum continuous flue-gas outlet temperatures do not exceed 1000°F (538°C).
    Submitted by: Owen on September 13, 2017

    Charles
    from Spanaway, WA asked:
    July 18, 2017
    Can this be used within an existing stove pipe?
    1 Answer
    Yes, it could. This liner is meant to be used to reline an existing masonry chimney.
    Submitted by: Owen on July 19, 2017

    Steve
    from Montpelier, VT asked:
    January 29, 2015
    Can I use this re-liner pipe to connect my wood burning stove in my living room to my masonry/stainless steel lined chimney?
    1 Answer
    If the stove is to be positioned within the alcove of the firebox, you can indeed vent it by routing this liner up your existing chimney. For appearance purposes, it is a good idea to use black stovepipe to run into the smoke shelf area, then convert to the liner.
    Submitted by: eFireplaceStore on January 29, 2015

    Gloria
    from Bend, OR asked:
    June 23, 2014
    Does this cause less buildup of creosote and allow for effective cleaning?
    1 Answer
    This liner is designed to resize a masonry chimney to match a 6 inch flue collar on many fireplace inserts and stoves. By sizing the chimney to match the flue collar, flue gases stay hotter and less creosote is deposited on the liner walls. The liner can be easily cleaned with a polyethylene brush and flexible fiberglass or nylon chimney rods.
    Submitted by: eFireplaceStore on June 24, 2014

    Customer Reviews
    4.5
    2 Reviews
    5
    50% (1)
    4
    50% (1)
    3
    0% (0)
    2
    0% (0)
    1
    0% (0)
    100% Recommend this product (2 of 2 responses)
    By Geoff from Sunspot, NM on January 29, 2015
    I would recommend this item to a friend.
    Re-liner pipe
    This material is easy to work with and fits well into existing chimneys.
    By Francois P. from Hudson, NH on October 23, 2011
    I would recommend this item to a friend.
    HomeSave UltraPro
    Fast Service!
    ProsFlexible
    ConsMetal should be a little bit heavier gauge
    test
    +

    Find the Right Gas Logs
    For Your Fireplace

    Gas Log Calculator Gas Log Calculator
    Back to Top
    +

    Let Our Experts Design
    Your Venting System

    Free Venting Design and Quote Free Venting Design and Quote
    Sign-up for our Email!
    Enter your email for new arrivals and special offers.