Part Number: 17635
eFireplaceStore Item Number: CPF-17635
*Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
* Please Note: This item can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled.
*Also Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.
This pre-cut 6" Pro liner by HomeSaver makes liner installation easier because there is no need to join pieces. Just unroll and make the connections at top and bottom. The liner is made from 316 Ti-alloy that has a 0.006" wall thickness. The materials resist corrosion and high heat and the patented roll-lock seams are gas tight so you won't have to worry about leaks. The pre-cut liner is available in lengths of 25', 30' and 35'. It is UL listed to 1777 Standard for zero clearance and ULC listed to S635-00. The section carries a lifetime manufacturer's warranty.