Part Number: 19124
eFireplaceStore Item Number: CPF-19124
*Venting Requirements: This unit requires venting pipe with an inner diameter of 6 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
* Please Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.
Special ceramic fibers that resist separation is what makes this HomeSaver Foil Face insulation ideal for installations with bends or offsets. It's literally a ceramic blanket covered with tough aluminum foil that is 2 mm thick for 1/4 inch variety or 3 mm thick for the 1/2-inch. Not only does the foil add insulation value, it makes FlexWrap easy to work with-just wrap it lengthwise on the pipe and fasten it with an adhesive. Careful installation can even help center your liner properly in the chimney. DuraFlex liners are UL/ULC listed for safety and dependability.