Part Number: 4PVP-HS
eFireplaceStore Item Number: CPF-25387
*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
* Please Note: A Wall Thimble and Round Horizontal Rain Cap must also be purchased to complete installation.
This house shield is used to protect the home's exterior from blower discharge and is designed for use in horizontal vent installations. The shield will fit the PelletVent Pro vent pipes with a 4" inner diameter. The part carries a limited lifetime warranty. Its dimensions are 12" x 12" with a 4.75" pipe opening. A complete vent termination contains other parts as well. The PelletVent Pro system is used for appliances that use wood pellet and oil fuel and is rated for continuous use flue temperatures up to 570° F.
Chimney Pipe Buyers Guide
How Flex Venting Helps Complicated Vent Pipe Set Up
DuraVent Type B Venting Installation Guide
DuraPlus Chimney Pipe Installation Guide
DirectVent Pro Installation Guide
Duratech Chimney Pipe Installation Guide
Chimney Pipe Buying Guide
Pellet Vent Pro Installation Guide
Chimney Cap Buying Guide
Pellet Vent Pipe (Buyers Guide)