- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
Dura-Vent PelletVent Pro Wall Thimble - For Vent Pipes with a 3-Inch Inner Diameter - 3PVP-WT
- Allows vent pipe to pass through a wall
- Provides the required 1" clearance to combustibles
- Accommodates wall thicknesses of 3 7/8" to 8"
- Fits vent pipes with a 3" diameter
- Limited lifetime warranty
- *Installation requires 7.5" x 7.5" square opening
Product Details
Part Number: 3PVP-WT eFireplaceStore Item Number: CPF-25426 UPC: 693892307540 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 3 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. PelletVent Pro's wall thimble allows your vent pipes to easily pass through walls once it is installed. Also, this product provides you with the required 1 inch clearance to all combustibles to keep you home and venting system safe. You can use this wall thimble on walls that are 4 to 8 inches thick and it fits most 3 inch vent pipes. Installation of this particular wall thimble requires a 7.5 inch by 7.5 inch square opening. Included with the product is a limited lifetime warranty in case of damage. Chimney Pipe Buyers Guide How Flex Venting Helps Complicated Vent Pipe Set Up DuraVent Type B Venting Installation Guide Duratech Chimney Pipe Installation Guide DirectVent Pro Installation Guide DuraPlus Chimney Pipe Installation Guide Chimney Pipe Buying Guide Pellet Vent Pro Installation Guide Chimney Cap Buying Guide Pellet Vent Pipe (Buyers Guide) |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
2 Questions &
2 Answers
Alfred S.
from Cleveland, NY asked:
June 18, 2021
Would you use this in a D-style log cabin, and if so, how?
1 Answer
Yes, this is the appropriate wall pass-through that would be used in that installation. You would need to measure the required opening needed to be cut out of the wall at the pre-determined height of your venting on the interior of the home, then proceed to cut your opening through the wall. It is advisable to use silicone on the exterior of the log home to properly seal the area once installed.
Submitted by:
Aaron D.
on June 18, 2021
Richard A.
from Nanchester, NH asked:
February 15, 2020
Can fiberglass insulation be used to fill cavity?
1 Answer
The wall thimble maintains an air space around the pipe. You can insulate around the thimble. You cannot insulate the airspace between the pipe and wall thimble shield.
Submitted by:
Brian L.
on February 17, 2020
Customer Reviews
