1.800.203.1642
Home
Chimney Pipe
Fireplace Dampers & Chimney Dampers
Vestal Cast Iron Fireplace Damper Plate - For 36 Inch Dampers
Vestal Cast Iron Fireplace Damper Plate - For 36 Inch Dampers
Images
Vestal Cast Iron Fireplace Damper Plate - For 36 Inch Dampers
$103.95
$129.99
20% Off
Free Shipping
Temporarily Out of Stock
Enter your email below to receive notifications when the product comes back in stock.
Thank you!
We will send you an email notifying you as soon as this item becomes available.
Frequently Purchased Together
Have questions?
Our NFI-certified experts are here to help!
Product Details
Features
- Approximate Dimensions: 7" D x 28 3/8" W
- Distance between tabs on the bottom is 20"
- Able to be used with poker and rotary-style controls
- 28" cast iron plate designed for 36" dampers
Having a warped or rusty damper plate isn't much better than not having one at all. If your damper plate has seen better days you might want to think about replacing it with a Vestal Cast Iron Fireplace Damper Plate. Able to be used with both poker and rotary-style controls, this durable plate can simply be slid into the space left by your old one. No muss, no fuss.
Customer Q&A with Product Specialists
Paul S.
from Charlottesville, VA asked:
How far from each end is the tab?
The distance from the edges to the tabs is approximately 4 inches, and between the tabs measures 20 inches.
Answered by:
Kathy O.
on Mar 24, 2023
Hyung Y.
from toronto canada asked:
My actual plate is 6x26 inches. Can I use this one?
No, this plate is not suitable for your application.
Answered by:
Tyler M. - NFI Master Hearth Professional
Donna L.
from 27403 asked:
Why does it say the damper is 36 inch but the stated actual measurement is less
This is a damper plate for 36" dampers. The damper it is meant for is 36" in total length, but this is a plate that only covers the opening of the damper, which is smaller.
Answered by:
Brennan W.
Fernando
from CA asked:
Do you have any installation instructions, please?
While there is no .pdf file containing instructions, we will be happy to provide them in the easiest way possible. Most damper assemblies are held in position with a layer of parging mix. If you have an existing damper that has rusted badly or otherwise needs replacement, it will need to be removed by using a cold chisel and hammer to break the existing parging mix loose. After removing the existing damper and any remaining mortar, the new assembly can be put into position as well as the new parging mix, used to secure it. If the new damper does not sit upon a brick ledge, you may need to construct temporary 2 x 4 supports to hold the damper assembly in position while the parging mix sets.
Answered by:
Brennan W.
Showing 4 of
6 Questions and Answers
Thank you for reaching out!
Thank you for your interest in our products. We've received your question and will get back to you shortly — usually within the hour but always within 1 business day. To ensure you receive our response, please add our email address (info@efireplacestore.com) to your email whitelist or address book.
In the meantime, while we prepare our response, keep an eye on your inbox for an email from us. We'll be sending you our exclusive Buyer's Guide, packed with valuable information to assist you in making the best decision for your needs.
If you have any further questions or need immediate assistance, feel free to reach out to us directly at 1-800-203-1642.
Thank you again for choosing eFireplaceStore.com!
Related Articles
Fireplace Dampers & Chimney Dampers Buyer's Guide
Chimney Pipe Buyers Guide
How to Save Money on Your Heating Bill This Winter
How Flex Venting Helps Complicated Vent Pipe Set Up
DuraVent Type B Venting Installation Guide
Duratech Chimney Pipe Installation Guide
DirectVent Pro Installation Guide
DuraPlus Chimney Pipe Installation Guide
Pellet Vent Pro Installation Guide
Chimney Cap Buying Guide
Customer Reviews