Part Number: 34294
eFireplaceStore Item Number: CPF-34294
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.
* Please Note: HomeSaver can only be sold and shipped to general contractors or licensed chimney sweeps. Orders to the general public cannot be fulfilled. If you have a contractor please provide his name and address. This will need to be shipped directly to the contractor. The manufacturer will not make exceptions.
If you are using 8" HomeSaver Pro or UltraPro chimney liner pipe, you will need this collar to create the top termination for the vent. It features a top plate, storm collar, and a top clamp all in one piece and is used to support the entire vent installation. The part is made of 316-Ti alloy stainless steel. The clamp attaches to the liner with a band connection that is tightened with a screwdriver to make a welded watertight seal. The dimensions of the plate are 18" x 18".