Part Number: 4PVP-TAD eFireplaceStore Item Number: CPF-69369 UPC: 662492156131 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. This part is a component in a system used to vent pellet and corn-fueled stoves and inserts. A tee creates a 90° offset for vent piping. This tee attaches directly to an appliance in place of a separate adapter. The PelletVent Pro system uses an air-insulated double wall construction, with a 0.012" stainless steel inner wall and a 0.018" galvalume outer wall. Laser-welded seams ensure a gas tight system and the pieces connect secure with a twist-lock fitting. The whole system has a 1" clearance to combustibles and is UL listed. A limited lifetime warranty applies. The tee has a 4" inner diameter and a 4-5/8" outer diameter and is 10" in length. Chimney Pipe Buyers Guide How Flex Venting Helps Complicated Vent Pipe Set Up DuraVent Type B Venting Installation Guide DirectVent Pro Installation Guide DuraPlus Chimney Pipe Installation Guide Duratech Chimney Pipe Installation Guide Chimney Pipe Buying Guide Pellet Vent Pro Installation Guide Chimney Cap Buying Guide Pellet Vent Pipe (Buyers Guide) |