- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
Dura-Vent DirectVent Pro Vent Pipe Wall Thimble - For Vent Pipes with a 4-Inch Inner Diameter - 46DVA-WT
- Acts as a wall pass-through and firestop for direct vent piping
- For use with DirectVent Pro Horizontal High-Wind Rain Caps
- Limited lifetime warranty
- Dimensions:
- 6 5/8" pipe opening
- 12.5" H x 12.5 W
- *May be required in Canada
- **A framed 10" opening is required
Product Details
Part Number: 46DVA-WT eFireplaceStore Item Number: CPF-69445 UPC: 693892309193 Features
*Venting Requirements: This unit requires venting pipe with an inner diameter of 4 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit. Installing a direct vent chimney through a combustible wall is simple with this Vent Pro vent pipe wall thimble by Dura-Vent. This chimney pipe thimble acts as a wall pass-through and firestop for direct vent piping for vent pipes with a 4 in. inner diameter. This thimble is intended for use with Direct Vent Pro horizontal high wind rain caps and is constructed from .020 in. aluminum inner wall, and a.018 in. galvanized steel outer wall. A framed 10 in. opening is require for installation. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
5 Questions &
5 Answers
Les
from Nampa, ID asked:
September 7, 2023
Can I mount it to my 3/4 thick plywood wall?
1 Answer
This thimble can be installed into your 3/4" plywood wall by cutting a 10"x10" square opening. However, please follow the clearance to combustible material instructions for the venting that you are using when installing the facing material.
Submitted by:
Aaron D.
on September 8, 2023
Chris
from Rhode Island asked:
August 1, 2020
Is this suitable for a pellet or wood stove pipe?
1 Answer
No. This wall thimble is made for use with DirectVent Pro, which should only be used with direct vent gas fireplaces.
Submitted by:
Will M.
on August 3, 2020
Tom M.
from hightide@gsinet.net asked:
January 1, 2020
Can you spray foam insulation around this wall thimble?
1 Answer
You may insulate around the thimble, but not within the thimble pass through itself (in the small space between the thimble and the 46DVA pipe length that passes through).
Submitted by:
Tyler M. - NFI Master Hearth Professional
on January 2, 2020
Jim
from Houghton Lake, MI asked:
November 9, 2017
Will this wall thimble span 7 and 1/4 inches?
1 Answer
Each half of this thimble measures 4" from end to end. As such, it should work just fine for your application. If additional span is needed, one could fabricate a "bridge" between the two halves with something like aluminum flashing.
Submitted by:
Kevin E.
on November 10, 2017
Jack
from NJ asked:
January 16, 2015
Is this item deep enough for 2 x 6 exterior walls?
1 Answer
This product is indeed deep enough to span a 2 x 6 wall with drywall on the interior and vinyl or wood lap siding on the exterior. If you have brick veneer, the thimble will not be wide enough. You would need to add a section of galvanized metal to extend the thimble if you do have a brick veneer.
Submitted by:
eFireplaceStore
on January 16, 2015
Customer Reviews
Review Summary
5.0
2 Reviews
5
100% (2)
4
0% (0)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (2 of 2 responses)
By Shane from
Bartonsville on November 11, 2016
I would recommend this item to a friend.
Wall thimble
At first I thought this is going to look really bad, but finished product is a clean, snug fit in the wall. Holds the pipe firm in the wall, definitely recommend installing with the vent pipe. Make sure you know what your doing because you don;t want to mess this up.
Finished product is a clean, snug fit in the wall. Holds the pipe firm in the wall, definitely recommend.
N/A
By Rick from
Maine on November 30, 2011
I would recommend this item to a friend.
Dura-Vent Wall thimble
Exactly what I needed, at a reasonable price, with incredibly fast shipping.
Does the job.
