Free shipping
Low Price
secure-order
View Cart
logo

    Dura-Vent DirectVent Pro Co-Linear Chimney System Top Termination Kit - 46DVA-GK

    215.95
    List Price: $269.99
    Sale Price: $215.95
    You Save: $54.04 (20%)
    In Stock.
    *Ships same business day.


    • Allows direct venting of appliances through existing masonry chimneys
    • Dual-liner system allows one liner to vent exhaust and the other to provide combustion air
    • Includes a top termination connector and 18" x 18" top plate
    • *Requires two separately purchased 3" aluminum liners, one 4" x 6 5/8" DirectVent Pro vertical rain cap, and an appliance connector
    See complete product details >>
    Popular Accessories for this Item
    Product Details
    Free Venting Design & Quote:
    Manufacturer: DuraVent
    Part Number: 46DVA-GK
    eFireplaceStore Item Number: CPF-69456
    UPC: 662492588321

    Features

    • Allows direct venting of appliances through existing masonry chimneys
    • Dual-liner system allows one liner to vent exhaust and the other to provide combustion air
    • Includes a top termination connector and 18" x 18" top plate
    • *Requires two separately purchased 3" aluminum liners, one 4" x 6 5/8" DirectVent Pro vertical rain cap, and an appliance connector


    *Venting Requirements: This unit requires venting pipe with an inner diameter of 3 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.

    Converting a masonry chimney in to an efficient direct vent system is easy with a Dura-Vent DirectVent Pro Co-Linear Chimney System Top Termination Kit. This convenient kit, when used in conjunction with two separately purchased 3-in. diameter aluminum chimney liners, allows you to install a direct vent appliance into an existing masonry chimney. Your customers will love how this dual-vent system uses equipment they already have, and you'll love how little time is needed to set it up.

    Dura-Vent is well-known in the hearth service industry for producing reliable and cost-effective products. Their DirectVent Pro line illustrates exactly why they have earned such a reputation. Approved for use with most direct vent appliances, the DirectVent Pro venting system includes a variety of convenient items, such as this Co-Linear Chimney System Top Termination Kit, to help every installation go as quickly and smoothly as possible. And homeowners always like this line because, in addition to providing attractive and efficient venting, each piece comes with a limited lifetime warranty. With DirectVent Pro, everyone wins.

    Please Note: Two separately purchased 3" aluminum liners, one 4" x 6 5/8" DirectVent Pro vertical rain cap, and an appliance connector are required for installation.

    Applications - DirectVent Pro is a unitized, coaxial venting system designed for use with direct vent gas or propane stoves, heaters, and fireplaces.

    Materials and Construction - .020" aluminum inner wall. .018" galvanized steel outer wall. Painted outer walls made of laser-welded .018" galvalume steel. Outer pipe brings combustion air to the appliance. Inner pipe exhausts flue gases to the outside. Gaskets or sealants not required (unless specified by the appliance manufacturer).

    Clearances - Specified by the appliance manufacturer.

    Listings - DirectVent Pro, in combination with the gas appliance, has been tested and listed as a decorative gas appliance system or as a direct vent heater system by a major testing agency, such as UL, CSA, Warnock Hersey, or OMNI.

    DuraVent Item Number: 46DVA-GK

    Customer Questions & Answers
    2 Questions & 2 Answers
    Paul
    from CA asked:
    July 1, 2017
    How do you know which hole to connect the exhaust and intake pipes?
    1 Answer
    Once the exhaust collar on the hearth system is determined, the liner corresponding to the exhaust should connect to the bottom collar corresponding to dead-center of the top cap connection on the co-linear to co-axial adapter.
    Submitted by: Will M. on July 3, 2017

    George
    from Brevard, NC asked:
    November 23, 2016
    I will mount this termination kit on the top of an existing round metal chimney with 9" I.D. and 14" O.D. Are there instructions for cutting and mounting the termination kit and trim rings or other accessories available that would ensure a weatherproof seal between the top of the existing round metal chimney and the flashing on this top termination kit?
    1 Answer
    While this may work for your chimney as the base measures 18" x 18", there are no specific instructions available for cutting down the base to work with air-cooled chimney.
    Submitted by: Will M. on November 23, 2016

    Customer Reviews
    4.0
    1 Reviews
    5
    0% (0)
    4
    100% (1)
    3
    0% (0)
    2
    0% (0)
    1
    0% (0)
    100% Recommend this product (1 of 1 responses)
    By Roy from NE on September 21, 2017
    I would recommend this item to a friend.
    Good Termination Kit
    I had to do minor modification for the base to fit on the chimney since the chimney was oval and not square. Otherwise, this is an excellent item.
    Overall: easy install.
    test
    +

    Find the Right Gas Logs
    For Your Fireplace

    Gas Log Calculator Gas Log Calculator
    Back to Top
    +

    Let Our Experts Design
    Your Venting System

    Free Venting Design and Quote Free Venting Design and Quote
    Sign-up for our Email!
    Enter your email for new arrivals and special offers.