Part Number: 8DP-TSS
eFireplaceStore Item Number: CPF-69820
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
* Please Note: Depending upon your installation you may need a separately purchased Tee Support Bracket.
This tee is a component in the DuraPlus triple wall all fuel chimney system that is used for venting wood, oil, coal, and gas appliances. Use of the tee creates a 90° offset for the chimney piping and is used in through-wall installations. The three walls enclose an insulating air space and a layer of refractory ceramic blanket which is a design that permits a 2" clearance to combustibles. The package includes the tee as well as the cover. The part is UL listed and carries a limited lifetime warranty. The tee is 16" tall with an 8" inner diameter and a 12" outer diameter
Chimney Pipe Buyers Guide
How Flex Venting Helps Complicated Vent Pipe Set Up
The Basics Of The Fireplace Flue
DuraVent Type B Venting Installation Guide
DirectVent Pro Installation Guide
DuraPlus Chimney Pipe Installation Guide
Duratech Chimney Pipe Installation Guide
Chimney Pipe Buying Guide
Pellet Vent Pro Installation Guide
Chimney Cap Buying Guide