Free shipping
Low Price
View Cart

    Snap-Lock Black Steel Stovepipe Draw Band for Connecting Stoves with Large Flue Collars - 8-Inch Diameter

    List Price: $29.99
    Sale Price: $21.95
    You Save: $8.04 (27%)
    In Stock.
    * Usually Ships Same Business Day.
    See complete product details >>
    Product Details
    Free Venting Design & Quote:
    Manufacturer: Snap-Lock
    Part Number: 8-616
    eFireplaceStore Item Number: CPF-73898


    • Connects Snap-Lock Stovepipe to appliances with flue collars that are slightly larger than the stovepipe
    • 8" diameter
    • Sturdy 24-gauge steel construction
    • Sleek black finish
    • 18" clearance to combustibles
    • Easily connects to other Snap-Lock products

    *Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page for venting pipe that must be used with this unit.

    When you connecting stovepipes to appliances, the pipe may not always match the stove. If you are using Snap Lock venting pipes, you are in luck. With this stovepipe black steel draw band, it is possible to take flue collars that are larger than you pipes openings and make it fit safely and securely. This draw band is eight inches in diameter. It is made from 24 gauge steel and has an attractive black finish.
    Customer Questions & Answers
    5 Questions & 5 Answers
    from Evansville, IN asked:
    November 1, 2017
    My flue stub pipe is 7 1/16", will this fitting work?
    1 Answer
    This will not work on its own but you might be able to modify the fit with the use of furnace rope gasket in between the connector and flue collar.
    Kelsey C.
    on November 1, 2017

    from Ashland, MA asked:
    August 17, 2017
    Will this fit around an 8 3/4" clay flue pipe?
    1 Answer
    No, the ID of that pipe is only 8".
    on August 18, 2017

    from WI asked:
    October 8, 2016
    May I use this product between two pipes to bring them together? Thank you.
    1 Answer
    This collar is not designed to connect two pipe sections together and should only be used to compensate for slight size differences between the diameter of the vent pipe and the collar on the stove. A better part to use would be the Snap-Lock Black Steel Stovepipe Male Coupling for Joining Female Ends - 8-Inch Diameter. This component is purposefully made to couple two pipe sections together with ease.
    on October 10, 2016

    from MA asked:
    April 1, 2016
    Do you sell a tee connector that goes from the vertical stove pipe to the horizontal pipe to the wall entry on a wood stove?
    1 Answer
    A tee should not be installed where a 90 degree elbow is normally used with the installation you describe as this would trap combustion byproducts in the top portion of the tee where a cap would theoretically be installed, quickly accumulating highly-flammable and toxic creosote, negating any benefit of adding a cleanout tee. A tee should only be used on a rear vent stove or on the vertical portion of the stovepipe run prior to the 90 degree elbow.
    Will M.
    on April 1, 2016

    from Defuniak Springs,FL asked:
    January 22, 2013
    What is the length of this product ?
    1 Answer
    Per the manufacturer, this draw band is 8 inches in height.
    Collin C. - NFI Master Hearth Professional
    on January 23, 2013

    Customer Reviews

    Let Our Experts Design
    Your Venting System


    Find the Right Gas Logs
    For Your Fireplace

    Sign-up for our Email!
    Enter your email for new arrivals and special offers.