Part Number: SPR8SLB
eFireplaceStore Item Number: CPF-77810
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
* Please Note: This item includes the 8-inch diameter joint locking band ONLY - this is the item designated by the letter 'A' in the picture on this page. Item 'B' is a wall support band and is NOT INCLUDED with purchase of this item, although a link to that item can be found elsewhere on this item page.
Joint Locking Bands should be used on elbow joints, lengths between elbows, and connections to a tee to provide perfect security for the SuperPro All-Fuel chimney pipe system. The stainless steel resists corrosion so you won't have worries about the part rusting. The joint locking band will fit 8" SuperPro chimney components. Be sure that any chimney installation is designed for your particular situation and that all components are installed according to applicable safety codes and regulations.
Chimney Pipe Buyers Guide
How Flex Venting Helps Complicated Vent Pipe Set Up
The Basics Of The Fireplace Flue
DuraVent Type B Venting Installation Guide
DirectVent Pro Installation Guide
DuraPlus Chimney Pipe Installation Guide
Duratech Chimney Pipe Installation Guide
Chimney Pipe Buying Guide
Pellet Vent Pro Installation Guide
Chimney Cap Buying Guide