Selkirk Ultra-Temp 8-Inch Inner Diameter Chimney Pipe Stainless Steel Elbow Kit - 30 Degree

Designed for use with 8-inch inner diameter (10-inch outer diameter) chimney pipe
Elbow kit includes: 2 elbow sections, 2 locking bands, and 1 interior resupport
The 30-degree insulated elbows can be used for fixed offsets of 30-degree slopes
Elbows rotate 360 degrees to create the exact angle desired
Greater angles than those described above are prohibited by UL Standard 103 and by the terms of the product's listing
Locking bands (included) must be used at each joint
Each offset must be resupported
Minimum 2-inch clearance to all combustibles is required
Type HT all-fuel chimney listed to UL103HT safety standards

Product Details

Free Venting Design & Quote:

Manufacturer: MetalBest
Part Number: 208211
eFireplaceStore Item Number: CPF-77940

Features

Designed for use with 8-inch inner diameter (10-inch outer diameter) chimney pipe
Elbow kit includes: 2 elbow sections, 2 locking bands, and 1 interior resupport
The 30-degree insulated elbows can be used for fixed offsets of 30-degree slopes
Elbows rotate 360 degrees to create the exact angle desired
Greater angles than those described above are prohibited by UL Standard 103 and by the terms of the product's listing
Locking bands (included) must be used at each joint
Each offset must be resupported
Minimum 2-inch clearance to all combustibles is required
Type HT all-fuel chimney listed to UL103HT safety standards

*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.

This elbow kit is exactly what you need to construct an angle for your MetalBest chimey system. Designed for use with an 8" inner diameter chimney pipe, this elbow kit rotates 360 degrees to create the precise angle that you wish for. The elbows can be used for fixed offsets of 30 degree slopes. Since angles greater than 30 degrees are prohibited by UL Standard 103, this product ensures you of every option available. The kit includes 2 elbow sections, 2 locking bands, and 1 interior resupport. Keep in mind that the included locking bands must be used at each joint, that each offset must be resupported, and that you must provide the required minimum clearance of 2" to all combustibles.