Part Number: 208622
eFireplaceStore Item Number: CPF-77964
*Venting Requirements: This unit requires venting pipe with an inner diameter of 8 Inches. Please see the Venting Components section on this page if available for venting pipe that must be used with this unit.
This kit is designed for use with an 8" inner diameter chimney system. The kit provides pieces used in a wall-supported installation with a horizontal length that passes through an exterior wall to a tee section, and then travel vertically on an exterior wall to terminate above the roof line. The kit includes a round top, 12" of insulated pipe, one wall band, insulated tee with plug, finishing collar, wall support kit, chimney pipe adapter, and an insulated wall thimble. The only thing missing from the kit is the insulated pipe lengths needed to reach the desired chimney height. Additional wall bands may be needed if the vertical run of the chimney is more than 16 feet. If the chimney passes through a roof eave, you may need to purchase adjustable roof flashing and a storm collar.
Chimney Pipe Buyers Guide
How Flex Venting Helps Complicated Vent Pipe Set Up
The Basics Of The Fireplace Flue
DuraVent Type B Venting Installation Guide
DuraPlus Chimney Pipe Installation Guide
DirectVent Pro Installation Guide
Duratech Chimney Pipe Installation Guide
Chimney Pipe Buying Guide
Pellet Vent Pro Installation Guide
Chimney Cap Buying Guide