Grand Canyon 30" Arizona Juniper See-Through Vented Propane Gas Logs Set and Stainless Steel Two Burner with Manual Valve

Individually cast logs
Hand painted
Cement Refractory with Re-Enforced Steel Fiber
Grand Canyon Gas Logs Outdoor Series brings the most realistic logs to the outdoor market
All Outdoor burners and Fire Rings are built with 304 Stainless Steel and carry a lifetime warranty when installed inside and 5 years warranty when installed outside
The Grand Canyon 2 Burner is ANSI Z21.60-2012/CSA2.26-2012 certified with a safety pilot system as well as CGA 2.17-M91 (R2009) certified for High Altitudes
Our US and Canada certifications allow for the burners to be safely installed and burned in both countries
The certifications cover Grand Canyon 2 burner sizes 18",21", 24", 30", 36" & 42"
These certified burners are tested to withstand the heat and are built to produce heat
The chassis of the burner is built out of 304 stainless steel and have the ability for the gas to flow in on either side of the burner depending on where your gas inlet is located at
The design of the burner has one main burner in the back and a second burner in the front that also acts as an ember burner
With many different log sets to choose from, Grand Canyon Gas Logs has developed a propriety design that allows for you to raise and lower the back tines depending on the size of your firebox and log style that you choose
Grand Canyon Gas Logs offers a complete array of valve system accessory that are able to fit the burn
Stainless Steel Burner

Product Details

Manufacturer: Grand Canyon
Part Number: AJST30LOGS-+-2BRN-ST30-SS-LP-CONVERSION-+-MA
eFireplaceStore Item Number: GRC-AJST30LOGS-2BRN-ST30-SS-LP-CONVERSION-MA

Features

Individually cast logs
Hand painted
Cement Refractory with Re-Enforced Steel Fiber
Grand Canyon Gas Logs Outdoor Series brings the most realistic logs to the outdoor market
All Outdoor burners and Fire Rings are built with 304 Stainless Steel and carry a lifetime warranty when installed inside and 5 years warranty when installed outside
The Grand Canyon 2 Burner is ANSI Z21.60-2012/CSA2.26-2012 certified with a safety pilot system as well as CGA 2.17-M91 (R2009) certified for High Altitudes
Our US and Canada certifications allow for the burners to be safely installed and burned in both countries
The certifications cover Grand Canyon 2 burner sizes 18",21", 24", 30", 36" & 42"
These certified burners are tested to withstand the heat and are built to produce heat
The chassis of the burner is built out of 304 stainless steel and have the ability for the gas to flow in on either side of the burner depending on where your gas inlet is located at
The design of the burner has one main burner in the back and a second burner in the front that also acts as an ember burner
With many different log sets to choose from, Grand Canyon Gas Logs has developed a propriety design that allows for you to raise and lower the back tines depending on the size of your firebox and log style that you choose
Grand Canyon Gas Logs offers a complete array of valve system accessory that are able to fit the burn
Stainless Steel Burner

* Fireplace Size Requirements: The fireplace's Middle Width must be at least 36 Inches and the Depth must be at least 14 Inches for this gas log set to fit. You can calculate the middle width of your firebox by measuring the width (left to right) approximately half way back in the firebox. If you have any questions, please contact our customer service department and we will be happy to assist you in finding the perfect size gas log set.

* Please Note: Outdoor 2 See-Through Burner carries lifetime warranty indoor and outdoor, however, matching logs goes from lifetime warranty when installed indoor to 5 years when installed outdoor.

Few things welcome in the beauty of fall more than an outdoor fire with friends and family gathered round to enjoy the warmth. Grand Canyon's 30" Arizona Juniper See-Through Vented Propane Gas Logs Set has beautifully hand painted and individually cast vented gas logs that are modeled after the unique Juniper trees found by log hunters in Northern Arizona. The two burner system features one main burner in the back for realistic flickering flames and an ember burner in the front that simulates falling coals. This model also includes a manual valve that is able to withstand up to 90K BTUs of heat.

Please Note: The fireplace's Middle Width must be at least 36 Inches and the Depth must be at least 14 Inches for this gas log set to fit. You can calculate the middle width of your firebox by measuring the width (left to right) approximately half way back in the firebox. If you have any questions, please contact our customer service department and we will be happy to assist you in finding the perfect size gas log set.