Hearth Products Controls 18" Electric Ignition Square Flat Fire Pit Insert - 24 VAC

Color: Stainless Steel(18FSSEI-SQ-NG/24VAC, 18FSSEI-SQ-LP/24VAC)
Product Dimensions: 18" W x 11 3/4" H x 18" D(18FSSEI-SQ-NG/24VAC, 18FSSEI-SQ-LP/24VAC)
24 VAC
Ready to install
Fully assembled
12" penta burner
For outdoor use only
Hot surface ignition system
Auto relights if flame is lost
CSA certified in US & Canada
Available for natural gas or propane gas
Control components protected within valve box
Optional wall switch or remote control available
Typically used with other lower voltage requirements
Internal temperature monitoring with overheat auto shutoff

Choose Power Supply(Required to Complete Unit)

The correct power supply gives you the power you need for your appliance, with optional numbers of output slots.

More Info

Product Features
- For 24 VAC models only
- Comes with 120 VAC power-cord
- Intertek power distribution system
- Output allows for control of up to 5 HPC EI fire pits or fire effect units
- For low voltage control of Hearth Products Controls electronic ignition fire pit inserts
More Info
Hearth Products Controls Single Output Powe ...
(add $343.18)
View Product Info
Product Features
- Color: Grey
- Product Dimensions: 6.75" W x 4.5" H x 5" D
- 3 outputs
- 60 Hz frequency
- Built in the USA
- Comes with 120VAC power-cord
- 1/8" steel, powder-coated nema 3R case
- Fully dimmable with low-voltage magnetic dimmer
- For use with 24 VAC electronic ignition fire pit inserts only
- Outputs allow for control of 3 HPC electric ignition fire pits
- Meets or exceeds all UL, CUL, ANSI/UL, and CSA requirements
More Info
Hearth Products Controls Three Output Power ...
(add $427.41)
View Product Info
Product Features
- Color: Grey
- Product Dimensions: 6.75" W x 4.5" H x 5" D
- 5 outputs
- 60 Hz frequency
- Built in the USA
- Comes with 120VAC power-cord
- 1/8" steel, powder-coated nema 3R case
- Fully dimmable with low-voltage magnetic dimmer
- For use with 24 VAC electronic ignition fire pit inserts only
- Outputs allow for control of 5 HPC electric ignition fire pits
- Meets or exceeds all UL, CUL, ANSI/UL, and CSA requirements
More Info
Hearth Products Controls Five Output Power ...
(add $640.36)
View Product Info

Product Details

Manufacturer: HPC
Part Numbers: 18FSSEI-SQ-LP-24VAC,, 18FSSEI-SQ-NG-24VAC
eFireplaceStore Item Number: HPC-18FSSEI-SQ-LP/24VAC

Features

Color: Stainless Steel(18FSSEI-SQ-NG/24VAC, 18FSSEI-SQ-LP/24VAC)
Product Dimensions: 18" W x 11 3/4" H x 18" D(18FSSEI-SQ-NG/24VAC, 18FSSEI-SQ-LP/24VAC)
24 VAC
Ready to install
Fully assembled
12" penta burner
For outdoor use only
Hot surface ignition system
Auto relights if flame is lost
CSA certified in US & Canada
Available for natural gas or propane gas
Control components protected within valve box
Optional wall switch or remote control available
Typically used with other lower voltage requirements
Internal temperature monitoring with overheat auto shutoff

Technical Specifications

65,000
Natural gas min/max gas inlet pressure: 6"/7" WC
Propane gas min/max gas inlet pressure: 10"/11" WC
For use with fixed piping systems only - not for use with small tanks

WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

This square fire pit insert is sure to be the life of your next backyard party! The Hearth Products Controls 18" Electric Ignition Square Flat Fire Pit Insert features a 12" penta burner that generates a maximum 65,000 BTU output and is available for either natural gas or propane! This 24 VAC model is typically used with other lower voltage requirements and comes fully assembled and ready for installation. Simply pick your correct fuel type and you're on your way to having a fire pit insert that won't fall flat!