Prism Hardscapes Ibiza Water Bowl

We do not have an installation video for the Prism Hardscapes Ibiza Water Bowl. However, the manufacturer's installation instructions provide step-by-step guidance for creating a watertight seal. You can find them here: Prism Hardscapes Water Only Installation Instructions. The seal is created at the base of the bowl where it meets the pedestal cap and the water pipe passes through. According to Section 2 of the instructions: 1. Install a 1-inch PVC water line in the center of the column, reduced to 1/2 NPT or larger at the bowl. The water connection should be centered in the bowl, as depicted in Figures 1 and 2. 2. Carefully place the bowl in its final position. It must be anchored securely. 3. Level the bowl using shims under the base. Improper leveling will affect the evenness of the water sheeting effect from the scupper. 4. Permanently secure the base of the bowl and the stainless washer to the cap using 3M Scotch-Weld Epoxy Adhesive 2216 B/A. 5. **Apply silicone to the gap** between the stainless washer and the PVC water pipe. **The epoxy bond at the base, combined with the silicone seal at the washer, creates the watertight integrity of the bowl**. 6. Cut the PVC water line to the desired height and attach a T fitting. 7. Turn on the water supply and adjust the flow rate so that the water drains at the same rate as it enters.