- FireplacesShop By TypeShop By UseShop By Brand
- Fireplace InsertsShop By TypeInsert AccessoriesShop By Brand
- Stoves
- Gas LogsShop By TypeShop Vented Log StylesShop Ventless Log Styles
Charred Aged
Split OakCharred
Frontier OakEvening
FyreEvening
Fyre SplitValley
Oak - HVAC
- Mantels
- Accessories
- Chimneys & Venting
- Outdoor Living
- Guides & Articles
FireplacesFireplace InsertsStovesGas LogsHVACMantelsAccessoriesChimneys & VentingOutdoor LivingGuides & ArticlesMy AccountOrder StatusHelp
image {{ pictureNum }} of {{ imageArray2.length }}
× 
Ask a Fireplace Specialist:
|
Rutland 8 Inch Round Chimney Sweep Series Poly Chimney Brush
- 6" of fill
- 8" diameter
- Highly acid-resistant
- Plastic bristles won't scratch surfaces while cleaning
- Ideal for insulated metal chimneys and metal stove pipes
- 1/4" threading for easy connection to fiberglass rods and pull rings
Popular Accessories for this Item
Product Details
Part Number: 16908 eFireplaceStore Item Number: RUT-16908 UPC: 022624169086 Features
 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov For more information go to www.P65Warnings.ca.gov.For cleaning insulated metal chimneys and metal stove pipes, there's no better choice than a Rutland Chimney Sweep Round Poly Chimney Cleaning Brush. The soft, yet sturdy bristles will effectively remove soot and creosote without scratching your flue. Quarter-inch threading also means that you'll be able to connect this chimney brush to a wide variety of fiberglass rods and pull rings. |
Customers Who Viewed This Item Also Viewed
Customer Questions & Answers
2 Questions &
2 Answers
John
from Carmel, NY asked:
October 26, 2020
Can I use this brush with viper system?
1 Answer
No, we would recommend using either the Viper Flat Wire brushes or the Viper Perlon brushes with the Viper Cleaning Systems.
Submitted by:
Tyler M. - NFI Master Hearth Professional
on October 27, 2020
Ralph Pe.
from Bailey, NC asked:
January 10, 2020
Why do you use a poly brush instead of wire?
1 Answer
To keep from scratching the stainless steel inside of the chimney on metal chimneys.
Submitted by:
Owen O.
on January 13, 2020
Customer Reviews
4.8
4 Reviews
5
75% (3)
4
25% (1)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (4 of 4 responses)
By Stuart from
MONTROSE on November 18, 2016
I would recommend this item to a friend.
it has done quite well for us so far.
It had been ages since we had serviced our chimneys, and this product did the job.
Effective inside our galvanized steel flues
the downside is that in a very long flue, the neck of the brush can become bent making it difficult to continue up the chimney. It will be best to use it from your roof, and if you cannot do that safely, you may be hiring a chimney sweep afterall. I am hoping to get some way to reinforce the neck for my next cleaning not for a year since my flues are clean now.
By Steve D. from
Louisville, KY on November 5, 2015
I would recommend this item to a friend.
Worked great
Easy to use after 3 times up and down my chimney was clean as a whistle. What a money saver especially since it cost $125 for a chimney sweep
By Raymond M. from
Bethesda MD on September 1, 2013
I would recommend this item to a friend.
Saved Me Money
This was a cinch to use. I didn?t want to pay hundreds of dollars to have a professional do the job, so I bought this. It did fine and saved me all that money. It didn?t take very long at all to complete the job either.
By Carolyn N. from
Carl Junction MO on August 20, 2013
I would recommend this item to a friend.
Time Saver
Wow! What a time saver. I put it together in a few minutes. A few minutes of use had removed several gallons from the chimney.
